RobotAutomationDevelopment-Dept/LGES-OC5-PtoP-Welder
12
1
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
LGES-OC5-PtoP-Welder/docs/분석/Aurora_20260622.log
NohDoyeon241104 15e5f5ba27 docs: 매뉴얼 화면 도식 분석·가접 용어 정리·SW Version 진척 반영 
- 산출물 23. SW 점검결과 xlsx: SW Version 작업이력 추가(핸드셰이크/bit15 Resume/RecipeNo 등),
  IO List bit15 신규(M70515 PLC_WELD_READY_REQ / M70015 PC_WELD_READY_ACK)·rename 반영
- architecture.md §8 용어 정리(가접 용접 = Tack Welding) 추가
- docs/분석 2026/06/22: AuroraUIComponent 재사용 UC·메인 View 도식 분석
- 기타 산출물 문서(DR 회의록·SOP·ILSOSConfig 등) 및 작업일지 포함
- SeqAutoRunPTOP.cs: 기존 로컬 변경 포함

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-22 12:04:38 +09:00

116 lines
12 KiB
Plaintext
Raw Blame History

2026-06-22 00:00:00.031 3992 12864 I UCScannerObjectTeachingViewModel: SystemParameter Update Skip >> From(UCMainAutoRunViewModel)
2026-06-22 00:00:00.031 3992 12864 V EquipmentSetup: AURORA_SYS_SETTING_CHANGED :: Param[SystemParameterILSOS] From[UCMainAutoRunViewModel]
2026-06-22 00:00:10.189 3992 12864 D Button : Aurora.View.LogEntry Clicked!
2026-06-22 00:00:45.861 3992 12864 D Button : Aurora.View.LogEntry Clicked!
2026-06-22 00:00:47.848 3992 12864 D Button : Aurora.View.LogEntry Clicked!
2026-06-22 00:01:03.066 3992 12864 D Button : Aurora.View.LogEntry Clicked!
2026-06-22 00:01:07.014 3992 12864 D Button : Aurora.View.LogEntry Clicked!
2026-06-22 00:01:08.004 3992 12864 D Button : Aurora.View.LogEntry Clicked!
2026-06-22 00:01:08.733 3992 12864 D Button : Aurora.View.LogEntry Clicked!
2026-06-22 00:01:41.220 3992 12864 I CamAgent[CAM1]: Stop Live.
2026-06-22 00:01:41.221 3992 12864 I CamAgent[CAM1]: Stop Live.
2026-06-22 00:01:41.386 3992 12864 I CamAgent[CAM1]: Start Live.
2026-06-22 00:01:45.681 3992 12864 D Button : 닫기 Clicked!
2026-06-22 00:01:47.993 3992 12864 D Button : Run AutoRun Clicked!
2026-06-22 00:01:49.700 3992 12864 D Button : 예 Clicked!
2026-06-22 00:01:49.743 3992 12864 I Sequence : sequence started - 'SeqAutoRunPTOP'
2026-06-22 00:01:49.746 3992 9592 I SeqAutoRunPTOP: [Sequence_Enter] 시퀀스 진입 - 레시피 초기화 및 장비 연결
2026-06-22 00:01:49.746 3992 9592 I SeqAutoRunPTOP: [Sequence_Enter] 레시피 [11], CC_Welding 활성화, 장비 초기화 완료
2026-06-22 00:01:49.746 3992 9592 I SeqAutoRunPTOP: [InitSequenceVariable] 캔버스 핸들 확보 + 용접대상 오브젝트 선택 시작
2026-06-22 00:01:49.746 3992 9592 I SeqAutoRunPTOP: [InitSequenceVariable] 변수 초기화 완료 (선택 오브젝트 5개)
2026-06-22 00:01:49.746 3992 9592 I SeqAutoRunPTOP: [InitDev] 디바이스 핸들 확보 시작 (Scanner/PLC/IO)
2026-06-22 00:01:49.746 3992 9592 I SeqAutoRunPTOP: [InitDev] 디바이스 핸들 확보 완료
2026-06-22 00:01:49.746 3992 9592 I SeqAutoRunPTOP: [Sequence_Enter] 장비 초기화 완료
2026-06-22 00:01:49.751 3992 9592 I SeqAutoRunPTOP: [Sequence_Enter] 완료 → CheckInitCondition 이동
2026-06-22 00:01:49.751 3992 9592 I SeqAutoRunPTOP: [CheckInitCondition] 초기 조건 확인 중
2026-06-22 00:01:49.757 3992 9592 I SeqAutoRunPTOP: [CheckInitCondition] 조건 확인 완료 → CheckPageNo 이동
2026-06-22 00:01:49.757 3992 9592 I SeqAutoRunPTOP: [CheckPageNo] PLC_PAGE_CHANGE_REQ 신호 대기 중...
2026-06-22 00:01:49.783 3992 12864 W Aurora : Cannot Find Sub Menu : => Use Previous(0)
2026-06-22 00:01:49.827 3992 12864 V EquipmentSetup: AURORA_REQ_TOAST_MESSAGE :: Param[Sequence_Enter] From[]
2026-06-22 00:01:52.342 3992 12864 D Button : Monitoring On!
2026-06-22 00:01:52.343 3992 12864 I CamAgent[CAM1]: Stop Live.
2026-06-22 00:01:52.343 3992 12864 I CamAgent[CAM1]: Stop Live.
2026-06-22 00:01:52.344 3992 12864 D Button : Menu Change : Main(Auto Run), Sub(Auto Run) >>>>>>>> Main(Monitoring), Sub(PLCBitMonitoring)
2026-06-22 00:01:52.344 3992 12864 V EquipmentSetup: AURORA_MAIN_MENU_CHANGED :: Param[(Monitoring, PLCBitMonitoring, False)] From[MainWindow]
2026-06-22 00:01:59.451 3992 12864 D Button : Auto run On!
2026-06-22 00:01:59.453 3992 12864 I CamAgent[CAM1]: Start Live.
2026-06-22 00:01:59.454 3992 12864 D Button : Menu Change : Main(Monitoring), Sub(PLCBitMonitoring) >>>>>>>> Main(Auto Run), Sub(Auto Run)
2026-06-22 00:01:59.455 3992 12864 V EquipmentSetup: AURORA_MAIN_MENU_CHANGED :: Param[(Auto Run, Auto Run, False)] From[MainWindow]
2026-06-22 00:02:08.726 3992 12864 D Button : Monitoring On!
2026-06-22 00:02:08.727 3992 12864 I CamAgent[CAM1]: Stop Live.
2026-06-22 00:02:08.727 3992 12864 I CamAgent[CAM1]: Stop Live.
2026-06-22 00:02:08.728 3992 12864 D Button : Menu Change : Main(Auto Run), Sub(Auto Run) >>>>>>>> Main(Monitoring), Sub(PLCBitMonitoring)
2026-06-22 00:02:08.728 3992 12864 V EquipmentSetup: AURORA_MAIN_MENU_CHANGED :: Param[(Monitoring, PLCBitMonitoring, False)] From[MainWindow]
2026-06-22 00:02:49.758 3992 9592 W SeqAutoRunPTOP: [CheckPageNo] Waiting for PLC_PAGE_CHANGE_REQ -> TIMEOUT...
2026-06-22 00:03:09.360 3992 12864 D Button : Auto run On!
2026-06-22 00:03:09.362 3992 12864 I CamAgent[CAM1]: Start Live.
2026-06-22 00:03:09.362 3992 12864 D Button : Menu Change : Main(Monitoring), Sub(PLCBitMonitoring) >>>>>>>> Main(Auto Run), Sub(Auto Run)
2026-06-22 00:03:09.364 3992 12864 V EquipmentSetup: AURORA_MAIN_MENU_CHANGED :: Param[(Auto Run, Auto Run, False)] From[MainWindow]
2026-06-22 00:03:11.639 3992 12864 D Button : Stop Clicked!
2026-06-22 00:03:11.639 3992 12864 D SeqWorker : stop workQ of sequence(SeqAutoRunPTOP)
2026-06-22 00:03:11.645 3992 9060 I Sequence : sequence already stopped - 'SeqAutoRunPTOP::[SeqAutoRunPTOP] Process (UploadWeldingList Seq)'
2026-06-22 00:03:11.645 3992 9060 D SeqWorker : stop workQ of sequence(SeqAutoRunPTOP)
2026-06-22 00:03:11.681 3992 12864 D Sequence : sequence stopped - 'SeqAutoRunPTOP'
2026-06-22 00:03:11.681 3992 12864 I Sequence : sequence already stopped - 'SeqAutoRunPTOP::[SeqAutoRunPTOP] Process (UploadWeldingList Seq)'
2026-06-22 00:03:11.681 3992 12864 I SeqAutoRunPTOP: [OnStopped] 시퀀스 Stop 수신 → 장비 정지 처리 시작
2026-06-22 00:03:11.681 3992 12864 I SeqAutoRunPTOP: [OnSeqActionStop] 시퀀스 강제 중지 - PLC/IO/Scanner 초기화 시작
2026-06-22 00:03:11.681 3992 12864 I SeqAutoRunPTOP: [OnSeqActionStop] PLC 음극 Output All false (양극 P 미사용 ? 양극 비트 제거)
2026-06-22 00:03:11.681 3992 12864 I SeqAutoRunPTOP: [OnSeqActionStop] PLC IO Output PAGECHANGE Init
2026-06-22 00:03:11.681 3992 12864 I SeqAutoRunPTOP: [OnSeqActionStop] PLC IO Output Word Init
2026-06-22 00:03:11.681 3992 12864 I SeqAutoRunPTOP: [PLCInterface] PC All Bit Off (Auto, ReadyAck, Busy, Complete)
2026-06-22 00:03:11.681 3992 12864 I SeqAutoRunPTOP: [IOInterface] PC All Bit Off (Laser Control, LBAD Trigger, LBAD Ready)
2026-06-22 00:03:11.682 3992 12864 I SeqAutoRunPTOP: [Scanner] StopExecution and JumpAbs(0,0)
2026-06-22 00:03:11.682 3992 9060 W Sequence : seq::SeqAutoRunPTOP::[SeqAutoRunPTOP] CHECK PageNo --[ null ]--> #FORCE_ERROR#
2026-06-22 00:03:11.682 3992 9060 I SeqAutoRunPTOP: [OnForceError] ForceError 발생 → 장비 정지 처리 시작
2026-06-22 00:03:11.682 3992 12864 I SeqAutoRunPTOP: [OnSeqActionStop] 모든 장비 초기화 완료
2026-06-22 00:03:11.682 3992 12864 I SeqAutoRunPTOP: [OnStopped] Stop 정지 처리 완료
2026-06-22 00:03:11.682 3992 9060 I SeqAutoRunPTOP: [OnSeqActionStop] 시퀀스 강제 중지 - PLC/IO/Scanner 초기화 시작
2026-06-22 00:03:11.682 3992 9060 I SeqAutoRunPTOP: [OnSeqActionStop] PLC 음극 Output All false (양극 P 미사용 ? 양극 비트 제거)
2026-06-22 00:03:11.682 3992 9060 I SeqAutoRunPTOP: [OnSeqActionStop] PLC IO Output PAGECHANGE Init
2026-06-22 00:03:11.682 3992 12864 I UCMainAutoRunViewModel: Stop AutoRun Requested and Cleaned up.
2026-06-22 00:03:11.682 3992 9060 I SeqAutoRunPTOP: [OnSeqActionStop] PLC IO Output Word Init
2026-06-22 00:03:11.682 3992 9060 I SeqAutoRunPTOP: [PLCInterface] PC All Bit Off (Auto, ReadyAck, Busy, Complete)
2026-06-22 00:03:11.682 3992 9060 I SeqAutoRunPTOP: [IOInterface] PC All Bit Off (Laser Control, LBAD Trigger, LBAD Ready)
2026-06-22 00:03:11.682 3992 9060 I SeqAutoRunPTOP: [Scanner] StopExecution and JumpAbs(0,0)
2026-06-22 00:03:11.683 3992 9060 I SeqAutoRunPTOP: [OnSeqActionStop] 모든 장비 초기화 완료
2026-06-22 00:03:11.683 3992 9060 I SeqAutoRunPTOP: [OnForceError] ForceError 정지 처리 완료
2026-06-22 00:03:11.683 3992 9060 I Sequence : seq::SeqAutoRunPTOP::#FORCE_ERROR# --[ null ]--> #FINAL#
2026-06-22 00:03:11.717 3992 12864 V EquipmentSetup: AURORA_REQ_TOAST_MESSAGE :: Param[(3, Fail SeqAutoRunPTOP)] From[]
2026-06-22 00:03:16.396 3992 12864 D Button : 아니오 Clicked!
2026-06-22 00:03:18.755 3992 13280 W ALARM : Code : 210005 , Description : PLC Heavy
2026-06-22 00:03:18.780 3992 12864 V EquipmentSetup: SYS_ALARM_SET_ALARM :: Param[Aurora.Framework.Alarm.AlarmDescription] From[AlarmManager]
2026-06-22 00:03:18.780 3992 12864 V EquipmentSetup: AURORA_MAIN_ALARM :: Param[True] From[AlarmManager]
2026-06-22 00:03:21.325 3992 12864 D Button : All Clear Clicked!
2026-06-22 00:03:21.325 3992 13280 W ALARM : Code : 210005 , Description : PLC Heavy
2026-06-22 00:03:21.325 3992 12864 V EquipmentSetup: AURORA_MAIN_ALARM :: Param[False] From[AlarmManager]
2026-06-22 00:03:21.326 3992 12864 V EquipmentSetup: SYS_ALARM_RESET_ALL_ALARM :: Param[System.Collections.Generic.List`1[Aurora.Framework.Alarm.AlarmDescription]] From[AlarmManager]
2026-06-22 00:03:21.326 3992 12864 V EquipmentSetup: SYS_ALARM_SET_ALARM :: Param[Aurora.Framework.Alarm.AlarmDescription] From[AlarmManager]
2026-06-22 00:03:21.326 3992 12864 V EquipmentSetup: AURORA_MAIN_ALARM :: Param[True] From[AlarmManager]
2026-06-22 00:03:26.684 3992 12864 D Button : All Clear Clicked!
2026-06-22 00:03:26.685 3992 12864 V EquipmentSetup: AURORA_MAIN_ALARM :: Param[False] From[AlarmManager]
2026-06-22 00:03:26.685 3992 13280 W ALARM : Code : 210005 , Description : PLC Heavy
2026-06-22 00:03:26.685 3992 12864 V EquipmentSetup: SYS_ALARM_RESET_ALL_ALARM :: Param[System.Collections.Generic.List`1[Aurora.Framework.Alarm.AlarmDescription]] From[AlarmManager]
2026-06-22 00:03:26.685 3992 12864 V EquipmentSetup: SYS_ALARM_SET_ALARM :: Param[Aurora.Framework.Alarm.AlarmDescription] From[AlarmManager]
2026-06-22 00:03:26.685 3992 12864 V EquipmentSetup: AURORA_MAIN_ALARM :: Param[True] From[AlarmManager]
2026-06-22 00:03:26.716 3992 12864 V EquipmentSetup: AURORA_MAIN_ALARM :: Param[False] From[AlarmManager]
2026-06-22 00:03:26.717 3992 12864 V EquipmentSetup: SYS_ALARM_RESET_ALL_ALARM :: Param[System.Collections.Generic.List`1[Aurora.Framework.Alarm.AlarmDescription]] From[AlarmManager]
2026-06-22 00:03:27.010 3992 12864 D Button : All Clear Clicked!
2026-06-22 00:03:27.026 3992 12864 D Button : All Clear Clicked!
2026-06-22 00:03:27.369 3992 12864 D Button : All Clear Clicked!
2026-06-22 00:03:28.140 3992 12864 D Button : Close Clicked!
2026-06-22 00:03:33.560 3992 12864 D Button : LOG (F9) Clicked!
2026-06-22 00:03:39.841 3992 12864 D Button : Auto Scroll On!
2026-06-22 00:03:41.180 3992 12864 D Button : Auto Scroll On!
2026-06-22 00:04:22.990 3992 12864 D Button : Aurora.View.LogEntry Clicked!
2026-06-22 00:05:12.526 3992 12864 D Button : Monitoring On!
2026-06-22 00:05:12.527 3992 12864 I CamAgent[CAM1]: Stop Live.
2026-06-22 00:05:12.527 3992 12864 I CamAgent[CAM1]: Stop Live.
2026-06-22 00:05:12.528 3992 12864 D Button : Menu Change : Main(Auto Run), Sub(Auto Run) >>>>>>>> Main(Monitoring), Sub(PLCBitMonitoring)
2026-06-22 00:05:12.528 3992 12864 V EquipmentSetup: AURORA_MAIN_MENU_CHANGED :: Param[(Monitoring, PLCBitMonitoring, False)] From[MainWindow]
2026-06-22 00:05:15.136 3992 12864 D Button : PLCWord monitoring On!
2026-06-22 00:05:15.137 3992 12864 D Button : Menu Change : Main(Monitoring), Sub(PLCBitMonitoring) >>>>>>>> Main(Monitoring), Sub(PLCWordMonitoring)
2026-06-22 00:05:15.138 3992 12864 V EquipmentSetup: AURORA_MAIN_MENU_CHANGED :: Param[(Monitoring, PLCWordMonitoring, False)] From[MainWindow]
2026-06-22 00:05:21.382 3992 12864 D Button : PLCBit monitoring On!
2026-06-22 00:05:21.384 3992 12864 D Button : Menu Change : Main(Monitoring), Sub(PLCWordMonitoring) >>>>>>>> Main(Monitoring), Sub(PLCBitMonitoring)
2026-06-22 00:05:21.385 3992 12864 V EquipmentSetup: AURORA_MAIN_MENU_CHANGED :: Param[(Monitoring, PLCBitMonitoring, False)] From[MainWindow]
Reference in New Issue View Git Blame Copy Permalink