using System;

namespace AuroraLaser
{
    public interface IExternalShutter
    {
        void SetExternalShutterOpen(int iLaserNo, bool bOpen);
        bool IsExternalShutterOpened(int iLaserNo);
        void SetDispLaser(bool bOn);
    }

    public interface IExternalLaserShot
    {
        void SetLaserShot(int iLaserNo, bool bLaserShotOn);
        int GetLaserShot(int iLaserNo);
    }

    #region Enumerator Definitions
    public enum eLaserType
    {
        ArmLaser,
        TrueDiskLaser,
        TruFiber,
        TruPulse,
        CoherentHyperRapidLaser,
        LaserRapidLX,
        NL202,
        IPG_YLPN,
        IPG_YLS,
        Coherent_Arm_IO,
        Trumpf_IO
    }
    public enum eTruFiberType
    {
        TruFiberP,
        TruFiberS,
        CalPercentToMeasuredVoltage,
        None
    }

    public enum eLaserStatus { STATUS_NONE = 0, STATUS_LASER_ON_STEP, STATUS_LASER_READY, STATUS_LASER_OFF_STEP, STATUS_LASER_OFF, STATUS_LASER_ERROR, STATUS_LASER_INFO_CHANGE };

    #endregion

    #region ArmLaser Definetions
    public struct sNodeInfo
    {
        public int nExist;
        public string strNodeName;              //  Command Name
        public string strDisplayNodeName;       //  Display Name
        public string strKey;                   //  Matching key, callback

        public int nNodeType;                   //  리턴 타입.
        public int IsCallBack;                  //  Max CallBack 10set.
        public int priority;                    //  통신 우선 순위. 작을수록 우선. 0부터 시작

        public int nDigit;                      //  배율. Pulse Power인 경우 1000 곱해야 한다. 이거 그냥 double로 해서 곱하는걸로?

        public int nKey;                        //  Coherent용 Write 별로 and할 필요가 있다. 1,2,4,8,16~~~
        public int nSettingValue;               //  Coherent용 Write 할 값(On/Off)

        //  return data.
        public int nRet;
        public long lRet;
        public UInt16 n16Ret;
        public UInt32 n32Ret;
        public UInt64 n64Ret;
        public bool bRet;
        public double dRet;
        public string strRet;
    }
    public class csNodeType
    {
        public const int INT = 0;
        public const int DOUBLE = 1;
        public const int STRING = 2;
        public const int UINT16 = 3;
        public const int UINT32 = 4;
        public const int UINT64 = 5;
        public const int BYTE = 6;
        public const int BOOL = 7;
    }

    /// TRUMPF TRUSDISK
    public class csReadNodeNo
    {
        public static readonly int EXT_ACTIVATION_ACTIVE = 0;
        public static readonly int LASER_WARNING_LAMP_IS_ON = 1;
        public static readonly int LASER_READY = 2;
        public static readonly int LASER_IS_ON = 3;
        public static readonly int LASER_ASSIGNED = 4;
        public static readonly int PILOT_LASER_IS_ON = 5;
        public static readonly int PROG_COMPLETED = 6;
        public static readonly int FAULT_LASER = 7;
        public static readonly int PROG_ACTIVE = 8;
        public static readonly int PROG_CANCELLED = 9;
        public static readonly int PROGRAM_NO = 10;
        public static readonly int PROGRAM_LINE_NO = 11;

        public static readonly int LASER_ON_PHASE = 12;
        public static readonly int LIGHTPATH_BLOCKED = 13;
        public static readonly int LLK_OPEN = 14;
        public static readonly int LLR_OFF = 15;
        public static readonly int MAINTENANCE = 16;
        public static readonly int MONITORING = 17;
        public static readonly int POWER_LIMIT = 18;
        public static readonly int AUXILIARYHEATING_ACTIVE = 19;
        public static readonly int FIRMWAREUPDATE_ACTIVE = 20;

        public static readonly int SIK_OPEN = 21;
        public static readonly int SLEEPMODE_ACTIVE = 22;
        public static readonly int SYNC_OPEN = 23;
        public static readonly int SYS_READY = 24;
        public static readonly int SYS_LASER_ESTOP_OPEN = 25;

        #region Pulse Data
        public static readonly int PULSE_POWER = 26;               //  DOUBLE Currently set pulse power PLC 화면상 생산 -> 펄스 데이터 부분의 펄스 출력
        public static readonly int PULSE_POWER_NOMINAL = 27;       //  DOUBLE Currently measured pulse power 목표값 펄스 출력.
        public static readonly int CW_POWER = 28;                  //  DOUBLE Laser Power
        public static readonly int POWER = 29;                     //  DOUBLE Currently measured laser power
        public static readonly int ENERGEY = 30;                    //  UINT64 Current Energy of the currently active pulse
        public static readonly int FREQUENCY = 31;                 //  DOUBLE Currently set pulse repetition frequency 목표값 펄스 주파수
        public static readonly int FREQUENCY_NOMINAL = 32;         //  DOUBLE Currently measured pulse repetition frequency 현재값 펄스 주파수
        public static readonly int PULSE_DURATION = 33;            //  UINT32 Currently set pulse duration 목표값 펄스 기간
        public static readonly int PULSE_DURATION_NOMINAL = 34;    //  UINT32 Currently measured pulse duration 현재값 펄스 기간
        public static readonly int PULSE_NUMBER = 35;              //  UINT16 Currently set pulse number 목표값 펄스 수량
        public static readonly int PULSE_NUMBER_NOMINAL = 36;      //  UINT16 Currently measured pulse number 현재값 펄스 수량
        #endregion

        #region Cooling
        public static readonly int COOLING_DI_PRESSURE_DIFF = 37;
        public static readonly int COOLING_DI_RETURN_PRESSURE = 38;       // Current pressure of the deionized water

        //CODE.BY.YIS Laser Cool Parameter Log 추가
        public static readonly int COOLING_PRESSURE_OUT_EXT = 39;
        public static readonly int COOLING_PRESSURE_IN_EXT = 40;
        public static readonly int COOLING_TEMP_WATER_IN_EXT = 41;
        public static readonly int COOLING_PWM_X30_MV = 42;
        public static readonly int COOLING_TEMP_TANK_SET_TRACKING = 43;
        public static readonly int COOLING_TEMP_COOLING_WATER = 44;
        public static readonly int COOLING_PRESSURE_PUMP = 45;
        public static readonly int COOLING_FC_MAX_FREQUENCY = 46;
        public static readonly int COOLING_FC_FREQUENCY_PUMP = 47;

        public static readonly int COLLING_TEMP_X80 = 48;
        public static readonly int COLLING_PRES_X90 = 49;
        public static readonly int COLLING_SPEED_FAN = 50;

        #endregion

        #region TruFiber
        public static readonly int LASER_CONTROL_IS_ON = 51;
        public static readonly int MACHINE_COOLING_READY = 52;
        public static readonly int PROCESS_FAULT = 53;
        public static readonly int PROCESS_MONITORING = 54;
        public static readonly int EMISSION_ON = 55;
        public static readonly int LASER_POWER = 56;
        #endregion

        #region Output Word
        public static readonly int OW06 = 66;
        public static readonly int OW07 = 67;
        public static readonly int OW08 = 68;
        public static readonly int OW09 = 69;
        public static readonly int OW10 = 70;
        public static readonly int OW11 = 71;
        public static readonly int OW12 = 72;
        public static readonly int OW13 = 73;
        public static readonly int OW14 = 74;
        public static readonly int OW15 = 75;
        #endregion

        #region
        public static readonly int LASTMESSAGE_TYPE = 90;
        public static readonly int LASTMESSAGE_COMPID = 91;
        public static readonly int LASTMESSAGE_COMPNUM = 92;
        public static readonly int LASTMESSAGE_MSGCODE = 93;
        public static readonly int LASTMESSAGE_SHORTTEXT = 94;
        public static readonly int LASTMESSAGE_TIMESTAMP = 95;


        #endregion
    }

    public class csWriteNodeNo
    {
        public const int EXT_ACTIVATION = 0;            //  Bool
        public const int LASER_RESET = 1;               //  Bool
        public const int LASER_ON = 2;                  //  Bool
        public const int PROG_STOP = 3;                 //  Bool
        public const int PSTART_DYN = 4;                //  Bool
        public const int REQUEST_LASER = 5;             //  Bool
        public const int PSTART_STATICAL = 6;           //  Bool
        public const int INQUIRY_1 = 7;                 //  Bool
        public const int INQUIRY_2 = 8;                 //  Bool
        public const int PILOT_LASER_ON = 9;            //  Bool
        public const int FAULT_EXT = 10;                //  Bool
        public const int LOCK_OPERATING_PANEL = 11;     //  Bool
        public const int PROGRAM_NO = 12;               // Uint16
        public const int LIGHT_PATH_NO = 13;            // Uint16
        public const int IW03 = 14;                     // Uint16
        public const int IW04 = 15;                     // Uint16
        public const int IW05 = 16;                     // Uint16
        public const int IW06 = 17;                     // Uint16
        public const int IW07 = 18;                     // Uint16
        public const int IW08 = 19;                     // Uint16
        public const int IW09 = 20;                     // Uint16
        public const int IW10 = 21;                     // Uint16
        public const int IW11 = 22;                     // Uint16
        public const int IW12 = 23;                     // Uint16
        public const int IW13 = 24;                     // Uint16
        public const int IW14 = 25;                     // Uint16
        public const int IW15 = 26;                     // Uint16
        public const int IW16 = 27;                     // Uint16
        public const int IW17 = 28;                     // Uint16
        public const int IW18 = 29;                     // Uint16
        public const int IW19 = 30;                     // Uint16
        public const int IW20 = 31;                     // Uint16
    }

    /// COHERENT
    public class csReadCOH
    {
        public const int INIT_COMMUNICATION = 0;        //  Laser ready for communication. 0=not ready, 1=ready
        public const int EMS_STATUS = 1;                //  Emission status. 0=off, 1=on
        public const int MAINS_STATUS = 2;              //  Card Main supply status.start 먹었는지 확인용. start이후 이 값이 1로 변경되어야 사용할 수 있다.
                                                        //        public const int SPO = 3;                     //  PSU Output state. 0=off, 1=on. start 이후 이 값이 on되면 레이저 발진 가능. ems로 대체 확인. spo는 0,1,2
        public const int WARNING_STATUS = 3;            //  Warning Status. 0=no warning, 1=warning in the system.
        public const int ERROR_STATUS = 4;              //  Error Status. 0=no error, 1=error in the system.
                                                        //        public const int FIBER_ERROR_STATUS = 6;        //  Fiber Error status
        public const int PILOT_LASER_STATE = 5;         //  Pilot Laser state
        public const int CONTROL_MODE = 6;              //  Local (1), Remote(2) need Local mode to use pilot laser.
        public const int WATER_FLOW_MAIN = 7;           //  Water flow state L/m
        public const int WATER_FLOW_MODULE_1 = 8;       //  Water flow state L/m
        public const int WATER_FLOW_MODULE_2 = 9;       //  Water flow state L/m
        public const int WATER_TEMP_MAIN = 10;          //  Water temp 0.1 degree
        public const int WATER_TEMP_MODULE_1 = 11;      //  Water temp 0.1 degree
        public const int WATER_TEMP_MODULE_2 = 12;      //  Water temp 0.1 degree
        public const int HUMIDITY_MAIN = 13;            //  Humidity 0.1%
        public const int HUMIDITY_MODULE_1 = 14;        //  Humidity 0.1%
        public const int HUMIDITY_MODULE_2 = 15;        //  Humidity 0.1%
        public const int ERROR_MESSAGE = 16;            //  Alarm Message.
        public const int LASER_POWER_CENTER = 17;       //  Laser Power CENTER Analog * ?? (Max 1500)
        public const int LASER_POWER_RING = 18;         //  Laser Power RING Analog * ?? (Max 2500)
    }

    public class csWriteCOH
    {
        //  return Value OK/ERROR/OK resetting.
        public const int SYSTEM_START = 0;              //  Bool !start.
        public const int LASER_START = 1;               //  Bool !spo 1/0
        public const int PILOT_LASER = 2;               //  Bool !abo 1/0
        public const int LASER_RESET = 3;               //  Bool !reset
        public const int CONTROL_MODE = 4;              //  Bool !spm 1(local)/2(remote)
    }
    #endregion
}