namespace AuroraLaser.Coherent
{
    partial class CompactMini
    {
        // Sti: Set laser power;   set current 인걸 보면, power 는 전류를 의미..??
        // 조건: only active if laser device is in mode Wrmc = 0
        // 단위: 0.1 [%], 범위: [0, 1000]
        public const string CMD_SetLaserPower = "Sti";    // Set Laser Power: + 파워숫자
        public const string CMD_GetInternalSetPower = "Rdk";    // Read out value of internal set power

        public const string CMD_GetSerialNumber = "Rdn";    // Read out serial number

        public const string CMD_SetPowerOff = "Stp0";    // Set PowerOn: Off
        public const string CMD_SetPowerOn = "Stp1";    // Set PowerOn: On

        // Set terminal emulation (VT100 mode)
        public const string CMD_SetVT100ModeOff = "Wrv0";    // VT100 mode off
        public const string CMD_SetVT100ModeOn = "Wrv1";    // VT100 mode on

        // Define source for laser control
        public const string CMD_SourceForLaserControlByInternal = "Wrml0";    // Internal (USB)
        public const string CMD_SourceForLaserControlByExternal = "Wrml1";    // Externla (Interface)

        // Define source for presetting the laser current
        public const string CMD_SourceForPresettingLaserCurrentByInternal = "Wrmc0";    // Internal (USB)
        public const string CMD_SourceForPresettingLaserCurrentByExternal = "Wrmc1";    // External (Interface)

        // Read out laser mode
        public const string CMD_GetLaserMode = "Rdm";    // Read out laser mode

        // Reset Error Internal
        // precondition: Wrml = 0 (Source for laser control : 0 = internal)
        public const string CMD_ResetError = "Str";     // Reset error internal

        // Read out error register
        public const string CMD_GetErrorRegister = "Rde";     // Read out error register

        // Read out status register
        public const string CMD_GetStatusRegister = "Rdx";      // Read out status laser

        // Read out current value of temperature of laser diode
        public const string CMD_GetTemperature = "Rdh";      // Read out laser diode temperature
    }
}