Can Exist 동작 방식 변경

AuroraDevices/AuroraCellTracker/CellTracker.cs

@@ -26,7 +26,7 @@ namespace AuroraCellTracker
     public class CellTracker : Device
     {
         Logger _Logger = new Logger("CellTracker");
-        public ICellTracker _CellTracker;
+        ICellTracker _CellTracker;
         public CellTrackerConfig _CellTrackerConfig { get; set; }
 
         private ICellTracker[] _MultiCellTrackerObj = new ICellTracker[4];

AuroraDevices/AuroraCellTracker/DaekhonCoporation/CellTrackerDaekhon.cs

@@ -149,8 +149,6 @@ namespace AuroraCellTracker.DaekhonCoporation
         {
             string lotId = "", cellId = "";
 
-            bool gotNew = false;
-
             if (selectedMode == eMode.Queue) {
                 if (null != dllSocketCtrl) {
                     string str = dllSocketCtrl.DllSocket_GetReceiveMessageInQueue(true, true);
@@ -160,7 +158,6 @@ namespace AuroraCellTracker.DaekhonCoporation
 
                         CalcCellInfo(str, out lotId, out cellId);
                         SetCellInfo(lotId, cellId);
-                        gotNew = true;
                     } else
                         CellInfoStrings.ReceiveStrInQueue = "Receive Length is 0";
                 } else
@@ -169,33 +166,27 @@ namespace AuroraCellTracker.DaekhonCoporation
                 _Logger.D(string.Format($"{CellInfoStrings.ReceiveStrInQueue}"));
             } else if (selectedMode == eMode.Callback) {
                 // Callback 방식의 경우, 자체 ConcurrentQueue에서 Deque해서 가져와야 함
-                CellInfoStr info;
+                CellInfoStr info; 
+
                 if (CellInfoQueue.TryDequeue(out info)) {
                     SetCellInfo(info.LotID, info.CellID);
-                    gotNew = true;
                 }
             }
 
-            // Queue 방식인데 Cell Tracker에서 메세지가 안 왔거나,
-            // Callback 방식인데 실제 수신이 없거나(또는 같은 값이 연속으로 들어오는 경우),
+            // Queue 방식인데 Cell Tracker에서 메세지가 안 왔거나, Callback 방식인데 Cell Tracker API 함수가 Callback 안 된 경우(ex : ECS 오프라인 모드),
             // Lot ID/Cell ID를 ES 지정사양에 맞추어 생성
-            if (!gotNew || (OldLotId == CellInfoStrings.LotID && OldCellId == CellInfoStrings.CellID)) {
+            if (OldLotId == CellInfoStrings.LotID && OldCellId == CellInfoStrings.CellID) {
                 CalcCellInfo("", out lotId, out cellId);
                 AddCellInfo(lotId, cellId);
 
                 CellInfoStr info;
-                if (CellInfoQueue.TryDequeue(out info)) {
+                if (CellInfoQueue.TryDequeue(out info))
+                {
                     SetCellInfo(info.LotID, info.CellID);
-                } else {
-                    // 새로운 값이 안들어와도 일단 보여줌
-                    SetCellInfo(lotId, cellId);
                 }
             }
-
             OldLotId = CellInfoStrings.LotID;
             OldCellId = CellInfoStrings.CellID;
-
-            _Logger.I($"Received CellInfo >> count({CellInfoQueue.Count})");
         }
 
         public void SendData(string str, bool isSendToUpperSystem = false)

AuroraDevices/AuroraIO/Vendor/AJINEXTEK/AjinIO.cs

@@ -505,7 +505,7 @@ namespace AuroraIO.AJINEXTEK
             int err = (int)CAXD.AxdiReadInport(index, ref data);
             if (err != (int)AXT_FUNC_RESULT.AXT_RT_SUCCESS)
             {
-                return false;
+                throw new Exception(string.Format("ERR_IO_FAIL_TO_GET_BIT;ERROR CODE:{0}", err));
             }
             return Convert.ToBoolean(data);
         }

AuroraDevices/AuroraLBAD/Services/StreamLightLBAD.cs

@@ -11,7 +11,6 @@ using System.Runtime.CompilerServices;
 using System.Runtime.InteropServices;
 using System.Text;
 using System.Threading.Tasks;
-using System.Windows;
 
 namespace AuroraLBAD.Service
 {
@@ -130,9 +129,6 @@ namespace AuroraLBAD.Service
 
         public bool SendReadyStatus(eRequestData data)
         {
-            if (ApplicationExt.IsSimulation)
-                return true;
-
             Stopwatch sw = Stopwatch.StartNew();
             //int requestData = 1001;
             Log.I($"StreamLight {MESSAGE_PC_LBAD_READY_STATUS} Request");
@@ -153,9 +149,6 @@ namespace AuroraLBAD.Service
 
         public bool SendCellInfo(string lotID, string cellID, int recipeNo, int modelID, int jigNo)
         {
-            if (ApplicationExt.IsSimulation)
-                return true;
-
             Stopwatch sw = Stopwatch.StartNew();
             byte[] arrCellinfo = null;
             int sendresult = MakeInfoData(lotID, cellID, recipeNo, modelID, jigNo, out arrCellinfo);
@@ -197,9 +190,6 @@ namespace AuroraLBAD.Service
         }
         public bool SendWeldingStop()
         {
-            if (ApplicationExt.IsSimulation)
-                return true;
-
             //Welding Stop On
             Stopwatch sw = Stopwatch.StartNew();
             //int requestData = 5000;

AuroraDevices/AuroraLaserScanner/AuroraLaserScanner.csproj

@@ -143,10 +143,6 @@
       <Project>{E7E68E54-43D2-4413-9510-43D25F13CD80}</Project>
       <Name>AuroraLaser</Name>
     </ProjectReference>
-    <ProjectReference Include="..\AuroraPLC\AuroraPLC.csproj">
-      <Project>{1A47B1F3-5BDE-41DF-8F4D-25298AD4F6DE}</Project>
-      <Name>AuroraPLC</Name>
-    </ProjectReference>
   </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
 </Project>

AuroraDevices/AuroraLaserScanner/Scanner.cs

@@ -22,7 +22,7 @@ namespace AuroraLaserScanner
         public ScannerConfig Config { get; set; }
 
         //public ScannerObj _scannerObj { get; set; }
-        protected ScannerObj _scannerObj { get; set; }
+        private ScannerObj _scannerObj { get; set; }
 
         public Scanner(string deviceId)
         {
@@ -37,9 +37,9 @@ namespace AuroraLaserScanner
             Config = config as ScannerConfig;
             if (IsSimul) {
                 _scannerObj = new ScannerSimul();
-                //return E1.OK;
+                return E1.OK;
             }
-            else if (Config.Type == eRTCType.RTC5) {
+            if (Config.Type == eRTCType.RTC5) {
                 _scannerObj = new ScannerRTC5();
             } else if (Config.Type == eRTCType.RTC6) {
                 _scannerObj = new ScannerRTC6();

AuroraDevices/AuroraLaserScanner/ScannerObj.cs

@@ -91,7 +91,7 @@ namespace AuroraLaserScanner
         RealImage = 0,
         VirtualImage = 1
     }
-    public enum eListNo { NONE = 0, LIST1 = 1, LIST2 = 2 };
+    public enum eListNo { LIST1 = 1, LIST2 = 2, };
 
     public enum eAutoControlParameter
     {

AuroraDevices/AuroraLaserScanner/ScannerSimul.cs

@@ -1,14 +1,10 @@
 using Aurora.Api;
 using Hermes;
-using System;
-using System.Diagnostics;
 using System.Runtime.InteropServices;
-using System.Threading;
-using static AuroraPLC.PLCBase;
 
 namespace AuroraLaserScanner
 {
-    public class ScannerSimul : ScannerObj
+    internal class ScannerSimul : ScannerObj
     {
         static new readonly Logger Log = new Logger("Scanner");
 
@@ -18,154 +14,7 @@ namespace AuroraLaserScanner
         //set_trigger 관련 추가, get_waveform 에서 얻어올 포인터 추가, 최대 크기로 설정 (2^20 = 1,048,576)
         [MarshalAs(UnmanagedType.LPArray, SizeConst = 1048576)] int[] m_getWaveformPtr = new int[1048576];
         private bool _ModulationMode;
-        private ScannerConfig _config;
 
-        // -----------------------------
-        // MOTF Simulation state
-        // -----------------------------
-        public Func<int, ePLCDevice, bool, (int err, bool data)> PLCReadBit;
-        public Func<int, ePLCDevice, bool, (int err, short data)> PLCReadWord;
-        public Func<int, ePLCDevice, bool, (int err, int data)> PLCReadDWord;
-        public Func<double> PLCGetAbsDeg;
-
-        private const int PLC_CURRENT_POS_1_ADDR = 4;
-
-        public Stopwatch sw = Stopwatch.StartNew();
-
-        // encoder가 반환할 값
-        public volatile int _simEncXCount = 0; //랩핑 각도(0~360
-        public volatile int _simEncYCount = 0; //누적 각도
-
-        public volatile bool LastWaitMissedRange = false;
-
-        private const int RotaryJigCount = 16;
-        private const double JigPerMsec = 300;
-        private const double DegreePerRev = 360.0;
-        private const double OneCycleMsec = JigPerMsec * RotaryJigCount;
-
-        // 누적각을 scanner 내부에서 유지
-        public double _angleAbsDeg = 0.0;
-        private bool _listClosed = false;
-        private bool _list1Busy = false;
-        private bool _list2Busy = false;
-        private eListNo _currentExecutingList = eListNo.NONE;
-        private bool _autoChangeRequested = false;
-
-        private long _listStartMs = 0;   // ← 이게 executionStartTime 역할
-
-        private const int MinListTimeMs = 30;      // 너무 빠른 완료 방지
-        private const int MaxListTimeMs = 800;     // 너무 느린 완료 방지
-        private int SimulatedListTimeMs = 250; // 리스트 실행 시간
-
-        private const double RecommendWindowDeg = 45.0;
-        private const double RecommendUseRatio = 0.35; // 45도 중 실제 마킹이 차지하는 비율(가볍게)
-
-        public void EquipmentSimulator()
-        {
-            PullEncoderFromPlcOnce();
-            UpdateListExecution();
-        }
-
-        private int DegToCount(double deg)
-        {
-            double c = deg * _config.MarkingOnTheFlyEncoderResolutionRotate / DegreePerRev;
-            return (int)System.Math.Round(c);
-        }
-
-        private int DegToCountAbs(double absDeg)
-        {
-            double c = absDeg * _config.MarkingOnTheFlyEncoderResolutionRotate / DegreePerRev;
-            long lc = (long)System.Math.Round(c);
-            return unchecked((int)lc);
-        }
-
-        private void UpdateListExecution()
-        {
-            if (_currentExecutingList == eListNo.NONE)
-                return;
-
-            long now = sw.ElapsedMilliseconds;
-            long elapsed = now - _listStartMs;
-
-            int doneTime = GetEffectiveListTimeMs();
-
-            // 최소 현실 가드: elapsed가 음수인 경우 방지
-            if (elapsed < 0) {
-                _listStartMs = now;
-                return;
-            }
-
-            if (elapsed >= doneTime) {
-                // 현재 리스트 실행 완료
-                if (_currentExecutingList == eListNo.LIST1)
-                    _list1Busy = false;
-                else
-                    _list2Busy = false;
-
-                if (_autoChangeRequested) {
-                    // 반대 리스트 자동 실행
-                    _currentExecutingList =
-                        (_currentExecutingList == eListNo.LIST1) ? eListNo.LIST2 : eListNo.LIST1;
-
-                    if (_currentExecutingList == eListNo.LIST1) {
-                        _list1Busy = true;
-                        _list2Busy = false;
-                    } else {
-                        _list2Busy = true;
-                        _list1Busy = false;
-                    }
-
-                    _listStartMs = now;
-                    _autoChangeRequested = false;
-                } else {
-                    _currentExecutingList = eListNo.NONE;
-                }
-            }
-        }
-        private int GetEffectiveListTimeMs()
-        {
-            int t = SimulatedListTimeMs;
-
-            //    4800msec / 360 * 45 * ratio
-            int recommendedListRunTime = (int)Math.Round((OneCycleMsec / DegreePerRev) * RecommendWindowDeg * RecommendUseRatio);
-
-            // recommended가 너무 작거나 0이 되는 경우 방지
-            if (recommendedListRunTime < MinListTimeMs)
-                recommendedListRunTime = MinListTimeMs;
-
-            if (t < MinListTimeMs)
-                t = MinListTimeMs;
-
-            if (t > MaxListTimeMs)
-                t = MaxListTimeMs;
-
-            if (recommendedListRunTime > MaxListTimeMs)
-                recommendedListRunTime = MaxListTimeMs;
-
-            return t;
-        }
-        public void TrySyncAbsAngleToPlcNow()
-        {
-            _angleAbsDeg = PLCGetAbsDeg();
-
-            // mod 동기화도 같이
-            int modRaw = PLCReadDWord(PLC_CURRENT_POS_1_ADDR, ePLCDevice.W, false).data;
-            double modDeg = (modRaw / 100_000.0) % DegreePerRev;
-            if (modDeg < 0)
-                modDeg += DegreePerRev;
-
-            LastWaitMissedRange = false;
-        }
-        public void ResetSim()
-        {
-            _angleAbsDeg = 0.0;
-
-            _simEncXCount = 0;
-            _simEncYCount = 0;
-
-            StopExecution(); // 리스트 상태 리셋
-            LastWaitMissedRange = false;
-        }
         public override uint Open()
         {
             IsOpenUnit = true;
@@ -184,7 +33,6 @@ namespace AuroraLaserScanner
             CommandPosZ = 0;
 
             _ModulationMode = config.Modulation;
-            _config = config;
 
             return E1.OK;
         }
@@ -259,17 +107,12 @@ namespace AuroraLaserScanner
 
         }
 
+
         public override void GetEncoder(out double encoderX, out double encoderY, bool rotateMode = false)
         {
-            int valueX = _simEncXCount;
-            int valueY = _simEncYCount;
-
-            // 너가 쓰는 변환식 그대로
-            encoderX = (valueX * DegreePerRev) / _config.MarkingOnTheFlyEncoderResolutionRotate;
-            encoderY = _angleAbsDeg;
-            if (encoderY > -0.5 && encoderY < 0)
-                encoderY = 0; // 시뮬 안정화
-            return;
+            // simulation 할때 값 반영 검토 필요
+            encoderX = 0;
+            encoderY = 0;
         }
 
         public override uint GetMarkingInfo()
@@ -344,62 +187,9 @@ namespace AuroraLaserScanner
 
         public override void WaitForEncoderRotateRange(double minX, double maxX, double minY, double maxY)
         {
-            LastWaitMissedRange = false;
-
-            long t0 = sw.ElapsedMilliseconds;
-
-            while (true) {
-                // 블로킹 대기 중에도 PLC에서 최신값을 직접 당겨온다
-                PullEncoderFromPlcOnce();
-
-                // GetEncoder는 _simEncYCount를 deg로 바꿔줄 것
-                GetEncoder(out _, out double curY, true);
-
-                // 정상 진입
-                if (curY >= minY && curY <= maxY)
-                    return;
-
-                // 최소 현실 가드: 구간을 지나쳤으면 TIMEOUT까지 끌지 말고 즉시 종료
-                // (실장에서도 "놓치면" 의미 없고 다음 로직이 꼬임)
-                if (curY > maxY) {
-                    LastWaitMissedRange = true;
-                    Log.W($"[SIM] WaitForEncoderRotateRange MISSED. curY={curY:F3}, range=[{minY:F3}..{maxY:F3}]");
-                    return;
-                }
-
-                // 최후 안전장치
-                if (sw.ElapsedMilliseconds - t0 > 5000) {
-                    LastWaitMissedRange = true;
-                    Log.W($"[SIM] WaitForEncoderRotateRange TIMEOUT. curY={curY:F3}, range=[{minY:F3}..{maxY:F3}]");
-                    return;
-                }
-
-                Thread.Sleep(1);
-            }
+            // simulation 할때 값 반영 검토 필요
         }
-        private void PullEncoderFromPlcOnce()
-        {
-            // 방어: delegate 미설정이면 아무 것도 못함
-            if (PLCReadDWord == null || _config == null || _config.MarkingOnTheFlyEncoderResolutionRotate == 0)
-                return;
 
-            // 1) 랩핑각 (0~360)
-            int modRaw = PLCReadDWord(PLC_CURRENT_POS_1_ADDR, ePLCDevice.W, true).data;
-            double angleModDeg = (modRaw / 100_000.0) % 360.0;
-            if (angleModDeg < 0)
-                angleModDeg += 360.0;
-
-            // 2) 누적각 (계속 증가)
-            //int absRaw = PLCReadDWord(PLC_CURRENT_POS_ABS_ADDR, ePLCDevice.W, true).data;
-            //double angleAbsDeg = absRaw / 100_000.0;
-            if (PLCGetAbsDeg != null) {
-                _angleAbsDeg = PLCGetAbsDeg();
-            }
-
-            // 3) count로 변환 (n_get_encoder가 반환한다고 가정하는 값)
-            _simEncXCount = DegToCount(angleModDeg);
-            _simEncYCount = DegToCountAbs(_angleAbsDeg);
-        }
         public override void SetFlyX(double encoderResolution)
         {
             // simulation 할때 값 반영 검토 필요
@@ -493,34 +283,16 @@ namespace AuroraLaserScanner
         }
         public override uint LoadList(eListNo no)
         {
-            bool busy = (no == eListNo.LIST1) ? _list1Busy : _list2Busy;
-
-            if (busy)
-                return 0;   // 실행 중 → Load 불가
-
-            return (uint)no;  // Load 가능
+            // simulation 할때 값 반영 검토 필요
+            return 0;
         }
         public override void SetEndList()
         {
-            _listClosed = true;
+            // simulation 할때 값 반영 검토 필요
         }
         public override void ExecuteList(eListNo no)
         {
-            if (!_listClosed)
-                Log.W("ExecuteList called without SetEndList");
-            _listClosed = false; // 실행 시작하면서 다시 열림 상태로
-
-            _currentExecutingList = no;
-
-            if (no == eListNo.LIST1) {
-                _list1Busy = true;
-                _list2Busy = false;
-            } else {
-                _list2Busy = true;
-                _list1Busy = false;
-            }
-
-            _listStartMs = sw.ElapsedMilliseconds;
+            // simulation 할때 값 반영 검토 필요
         }
         public override void StartLoop()
         {
@@ -532,28 +304,16 @@ namespace AuroraLaserScanner
         }
         public override void AutoChange()
         {
-            if (_currentExecutingList == eListNo.NONE)
-                return;
-
-            _autoChangeRequested = true;
+            // simulation 할때 값 반영 검토 필요
         }
         public override bool GetBusyStatus()
         {
-            return _list1Busy || _list2Busy || _currentExecutingList != eListNo.NONE;
+            // simulation 할때 값 반영 검토 필요
+            return false;
         }
         public override void StopExecution()
         {
-            _list1Busy = false;
-            _list2Busy = false;
-            _currentExecutingList = eListNo.NONE;
-            _autoChangeRequested = false;
-            _listStartMs = 0;
-            _listClosed = false;
-
-            _angleAbsDeg = 0.0;
-
-            _simEncXCount = 0;
-            _simEncYCount = 0;
+            // simulation 할때 값 반영 검토 필요
         }
         public override uint GetRTCVersion()
         {

Machines/ILSOS_ACW_H52A/Sequences/SeqAutoRunACWH52A.cs

@@ -51,6 +51,7 @@ namespace ILSOS_ACW_H52A.Sequences
 
         public const string SEQ_CHECK_SCANNER_LIST_COMPLETE = "[SeqAutoRunACWH52A] Check Scanner List Complete";
 
+        const string SEQ_CHECK_CAN_EXIST = "[SeqAutoRunACWH52A] Check Can Exist";
         const string SEQ_READY_SCANNER_LIST = "[SeqAutoRunACWH52A] Ready ScannerList";
 
         const string SEQ_SET_PARAMS_UPLOAD_WELDING_LIST_SEQ = "[SeqAutoRunACWH52A] Set Sequence Param (UploadWeldingList Seq)";
@@ -68,6 +69,8 @@ namespace ILSOS_ACW_H52A.Sequences
         const string SEQ_SET_PARAMS_REPORT_CELL_RESULT_SEQ = "[SeqAutoRunACWH52A] Set Sequence Param (ReportCellResult Seq)";
         const string SEQ_DO_ID_REPORT_CELL_RESULT_SEQ = "[SeqAutoRunACWH52A] Process (ReportCellResult Seq)";
         const string SEQ_GET_RESULT_REPORT_CELL_RESULT_SEQ = "[SeqAutoRunACWH52A] Get Sequence Result (ReportCellResult Seq)";
+        
+        const string SEQ_APD_DATA_SAVE = "[SeqAutoRunACWH52A] APD Data Save";
 
         //const string SEQ_REPORT_CELLINFO_TO_PLC = "[SeqAutoRunACWH52A] ReportCellInfoToPLC";
         const string SEQ_CHECK_CYCLE_STOP = "[SeqAutoRunACWH52A] Check Cycle Stop";
@@ -105,7 +108,7 @@ namespace ILSOS_ACW_H52A.Sequences
 
         private IRecipeManager _RecipeManager;
 
-        private eListNo _WeldingScannerListNo;
+        private eListNo _WeldingScannerListNo = eListNo.LIST1;
 
         private List<IDrawObject> _SelectedDrawObjectList;
 
@@ -139,12 +142,13 @@ namespace ILSOS_ACW_H52A.Sequences
         private double _RotaryEncoderOffset = 0;
         private int _WeldingJigNo = -1;
         private int _WeldingCount = 0;
-        private int _RotaryJigCount = 16;
+        private const int _RotaryJigCount = 16;
 
         private double _WeldingStartAngle;
 
-        private bool isTheFirstListWrite;
-        private bool isTheSecondListWrite;
+        private bool isTheFirstListWrite = false;
+        private bool isTheSecondListWrite = false;
+
         private bool isTheFirstListExecute;
         private int _RecipeNo;
 
@@ -174,7 +178,8 @@ namespace ILSOS_ACW_H52A.Sequences
 
             sb.AddAction(SEQ_CHECK_LOAD_COMPLETE, CheckLoadComplete);
             sb.AddAction(SEQ_CHECK_SCANNER_LIST_COMPLETE, CheckScannerListComplete);
-            sb.AddDecision(SEQ_READY_SCANNER_LIST, ReadyScannerList);
+            sb.AddDecision(SEQ_CHECK_CAN_EXIST, CheckCanExist);
+            sb.AddAction(SEQ_READY_SCANNER_LIST, ReadyScannerList);
 
             sb.AddAction(SEQ_SET_PARAMS_UPLOAD_WELDING_LIST_SEQ, SetUploadWeldingList_SeqParams);
             sb.AddSubsequence(SEQ_DO_ID_UPLOAD_WELDING_LIST_SEQ, SequenceManager.GetSeqBuilder_SeqUploadWeldingList());
@@ -195,20 +200,23 @@ namespace ILSOS_ACW_H52A.Sequences
             sb.AddDecision(SEQ_CHECK_CAN_WELDED, CheckCanWelded);
 
             sb.AddAction(SEQ_SAVE_RESULT_DATA, SaveResultData);      // 해당 공정의 정보를 기록 함.
+
+            //sb.AddAction(SEQ_APD_DATA_SAVE, SaveCellAPDData);      // 용접 완료 시 Cell의 정보를 저장함
             sb.AddAction(SEQ_WRITE_COMPLETION_PLC_BIT, WriteCompletionPLCBit);      // 정상적으로 종료 되면, complete bit write
             sb.AddAction(SEQ_INIT_CONDITION_ERROR, InitConditionError);
             sb.AddAction(SEQ_COMPLETE, Complete);
 
             sb.Flows(sb.Init > sb[SEQ_ENTER] > sb[SEQ_CHECK_INIT_CONDITION] > sb[SEQ_FORK_ENCODER_MONITOR] > sb[SEQ_CHECK_LOAD_COMPLETE]
+                    > sb[SEQ_CHECK_CAN_EXIST]
                     > sb[SEQ_SET_PARAMS_RECEIVE_CELL_INFO_SEQ] > sb[SEQ_DO_ID_RECEIVE_CELL_INFO_SEQ] > sb[SEQ_GET_PARAMS_RECEIVE_CELL_INFO_SEQ]
-                    > sb[SEQ_CHECK_SCANNER_LIST_COMPLETE] > sb[SEQ_READY_SCANNER_LIST]
+                    > sb[SEQ_READY_SCANNER_LIST]
                     > sb[SEQ_SET_PARAMS_UPLOAD_WELDING_LIST_SEQ] > sb[SEQ_DO_ID_UPLOAD_WELDING_LIST_SEQ] > sb[SEQ_GET_RESULT_UPLOAD_WELDING_LIST_SEQ]
-                    > sb[SEQ_EXECUTE_WELDING] > sb[SEQ_REQUEST_UNLOAD_CELL] > sb[SEQ_CHECK_CAN_WELDED]
+                    > sb[SEQ_EXECUTE_WELDING] > sb[SEQ_REQUEST_UNLOAD_CELL] > sb[SEQ_CHECK_SCANNER_LIST_COMPLETE]> sb[SEQ_CHECK_CAN_WELDED] 
                     > sb[SEQ_SET_PARAMS_REPORT_CELL_RESULT_SEQ] > sb[SEQ_DO_ID_REPORT_CELL_RESULT_SEQ] > sb[SEQ_GET_RESULT_REPORT_CELL_RESULT_SEQ]
-                    > sb[SEQ_SAVE_RESULT_DATA] > sb[SEQ_CHECK_CYCLE_STOP]
-                    > sb[SEQ_WRITE_COMPLETION_PLC_BIT] > sb[SEQ_JOIN_ENCODER_MONITOR] > sb[SEQ_COMPLETE]);
+                    > sb[SEQ_CHECK_CYCLE_STOP]
+                    > sb[SEQ_SAVE_RESULT_DATA] > sb[SEQ_WRITE_COMPLETION_PLC_BIT] > sb[SEQ_JOIN_ENCODER_MONITOR] > sb[SEQ_COMPLETE]);
 
-            sb.Flows(sb[SEQ_READY_SCANNER_LIST] > sb[SEQ_EXECUTE_WELDING]);
+            sb.Flows(sb[SEQ_CHECK_CAN_EXIST] > sb[SEQ_EXECUTE_WELDING]);
 
             sb.Flows(sb[SEQ_CHECK_CAN_WELDED] > sb[SEQ_CHECK_CYCLE_STOP]); // 용접을 하지 않은 Cell은 상위보고 하지 않는다.
             sb.Flows(sb[SEQ_CHECK_CYCLE_STOP] > sb[SEQ_CHECK_LOAD_COMPLETE]);
@@ -269,6 +277,8 @@ namespace ILSOS_ACW_H52A.Sequences
             _RecipeManager = Application.Current.AuroraEnv().RecipeManager;
             _SystemParameter = context.GetSetting<SystemParameter>(CommonSettingIds.SystemParameter);
 
+
+
             InitDev(context);
             if (!CheckDeviceReady(context))
             { //Check Device
@@ -300,7 +310,7 @@ namespace ILSOS_ACW_H52A.Sequences
             var mainPage = WeldingRecipeManager.GetWeldingPage();
             _ScannerCanvasUserCtrl = mainPage.ScannerCanvasCtrlAutoPage;
 
-            _WeldingScannerListNo = eListNo.LIST1;
+            //_WeldingScannerListNo = eListNo.LIST1;
 
             _CellMeasureCenterOffsetX = 0.0;
             _CellMeasureCenterOffsetY = 0.0;
@@ -384,118 +394,118 @@ namespace ILSOS_ACW_H52A.Sequences
             //InitAutoRunBit();
             // LBAD Initialize
             // LBAD 는 server 이기 때문에, 만약 끊어졌으면 다시 접속이 필요함
-            if (_SystemParameter.BypassModeLBAD == false)
-            {
-                if (!_StreamLightLBAD._Client.IsActivated)
+                if (_SystemParameter.BypassModeLBAD == false)
                 {
-                    int ret = _StreamLightLBAD._Client.Activate();
-                    Thread.Sleep(500);
-                    if (ret != E1.OK)
+                    if (!_StreamLightLBAD._Client.IsActivated)
                     {
-                        Log.E($"StreamLightClient activate failed");
-                        return (int)InitErrorList.LBAD_CLIENT_ACTIVATE_FAILED;
+                        int ret = _StreamLightLBAD._Client.Activate();
+                        Thread.Sleep(500);
+                        if (ret != E1.OK)
+                        {
+                            Log.E($"StreamLightClient activate failed");
+                            return (int)InitErrorList.LBAD_CLIENT_ACTIVATE_FAILED;
+                        }
+                    }
+
+                    if (_StreamLightLBAD._Sub.IsActivated == false)
+                    {
+                        int ret = _StreamLightLBAD._Sub.Activate();
+                        Thread.Sleep(500);
+                        if (ret != E1.OK)
+                        {
+                            Log.E($"StreamLightSub activate failed");
+                            return (int)InitErrorList.LBAD_SUB_ACTIVATE_FAILED;
+                        }
+                    }
+                    _StreamLightLBAD.Initialize();
+                    if (_StreamLightLBAD.SendReadyStatus(eRequestData.Ready_On) == false)
+                    {
+                        Log.I(string.Format($"[LBAD Interface]CheckReadyStatus null"));
+                        //return false;
                     }
                 }
 
-                if (_StreamLightLBAD._Sub.IsActivated == false)
+                // Laser Initialize
+                _Laser.PilotLaserOff();
+                _Laser.LaserOn();
+                Thread.Sleep(500);
+                if (!_Laser.GetLaserReady())
                 {
-                    int ret = _StreamLightLBAD._Sub.Activate();
-                    Thread.Sleep(500);
-                    if (ret != E1.OK)
-                    {
-                        Log.E($"StreamLightSub activate failed");
-                        return (int)InitErrorList.LBAD_SUB_ACTIVATE_FAILED;
-                    }
+                    Log.E("ERROR Initialize Laser");
+                    return (int)InitErrorList.LASER_INIT_ERROR;
                 }
-                _StreamLightLBAD.Initialize();
-                if (_StreamLightLBAD.SendReadyStatus(eRequestData.Ready_On) == false)
+                // Scanner Initialize
+                if (_Scanner.GetModulationMode())
                 {
-                    Log.I(string.Format($"[LBAD Interface]CheckReadyStatus null"));
-                    //return false;
-                }
-            }
-
-            // Laser Initialize
-            _Laser.PilotLaserOff();
-            _Laser.LaserOn();
-            Thread.Sleep(500);
-            if (!_Laser.GetLaserReady())
-            {
-                Log.E("ERROR Initialize Laser");
-                return (int)InitErrorList.LASER_INIT_ERROR;
-            }
-            // Scanner Initialize
-            if (_Scanner.GetModulationMode())
-            {
-                _ModulationMode = true;
-            }
-            else
-            {
-                _ModulationMode = false;
-            }
-
-            //// PLC Initialize  AutoRun Bit 최소화 작업 진행
-            if (_PLC.ReadBit((int)eBitInput.PLC_AUTO_STATUS).data == false)     //  AutoRun Bit가 OFF인 경우
-            {
-                if (_PLC.ReadBit((int)eBitInput.PLC_AUTO_REQ).data == false)    // AutoRun Request 상태 체크
-                {
-                    Log.E(string.Format("ERROR Initialize PLC, PLC Alarm ON"));     // AutoRun Request와 AutoRun Bit 모두 OFF인 경우, PLC 측에서 Alarm 발생함.
-                    return (int)InitErrorList.PLC_ALARM;
+                    _ModulationMode = true;
                 }
                 else
                 {
-                    Log.E(string.Format("ERROR Initialize PLC, Bit Off PLC_AUTO_STATUS"));       // AutoRun Request가 ON인데 AutoRun Bit 모두 OFF인 경우, PLC에서 AutoRun Bit를 켜지 않음.
-                    return (int)InitErrorList.PLC_AUTORUN_BIT_OFF;
+                    _ModulationMode = false;
                 }
-            }
 
-            // Marking On The Flying Off
-            if (_Scanner.Config.UseMarkingOnTheFly == false)
-            {
-                Log.E("ERROR Config Setting : Scanner Marking on the fly (OFF)");
-                return (int)InitErrorList.MOTF_OFF;
-            }
+                //// PLC Initialize  AutoRun Bit 최소화 작업 진행
+                if (_PLC.ReadBit((int)eBitInput.PLC_AUTO_STATUS).data == false)     //  AutoRun Bit가 OFF인 경우
+                {
+                    if (_PLC.ReadBit((int)eBitInput.PLC_AUTO_REQ).data == false)    // AutoRun Request 상태 체크
+                    {
+                        Log.E(string.Format("ERROR Initialize PLC, PLC Alarm ON"));     // AutoRun Request와 AutoRun Bit 모두 OFF인 경우, PLC 측에서 Alarm 발생함.
+                        return (int)InitErrorList.PLC_ALARM;
+                    }
+                    else
+                    {
+                        Log.E(string.Format("ERROR Initialize PLC, Bit Off PLC_AUTO_STATUS"));       // AutoRun Request가 ON인데 AutoRun Bit 모두 OFF인 경우, PLC에서 AutoRun Bit를 켜지 않음.
+                        return (int)InitErrorList.PLC_AUTORUN_BIT_OFF;
+                    }
+                }
 
-            // MOTF Set Scanner List
-            _Scanner.SelectCorrectionTable(2);
-            Log.I(string.Format("Normal, Select Laser Correction File"));
+                // Marking On The Flying Off
+                if (_Scanner.Config.UseMarkingOnTheFly == false)
+                {
+                    Log.E("ERROR Config Setting : Scanner Marking on the fly (OFF)");
+                    return (int)InitErrorList.MOTF_OFF;
+                }
 
-            // Aurora 내부에서 찾아야할 듯 함
-            //UsePlcShotThemAll = Dao.SystemRecipe.PlcShotThemAll;
-            //UsePlcPositionCompensation = Dao.SystemRecipe.PlcPositionCompensationUse;
-            string[] strArr = Dao.SystemRecipe.WorkRecipeFile.Split('\\');
-            RecipeFileName = strArr[strArr.Length - 1];
+                // MOTF Set Scanner List
+                _Scanner.SelectCorrectionTable(2);
+                Log.I(string.Format("Normal, Select Laser Correction File"));
 
-            _LastScannerParamNo = -1;
+                // Aurora 내부에서 찾아야할 듯 함
+                //UsePlcShotThemAll = Dao.SystemRecipe.PlcShotThemAll;
+                //UsePlcPositionCompensation = Dao.SystemRecipe.PlcPositionCompensationUse;
+                string[] strArr = Dao.SystemRecipe.WorkRecipeFile.Split('\\');
+                RecipeFileName = strArr[strArr.Length - 1];
 
-            // 트럼프 TruDisk를 쓰기 위해서는 SetFirstPulseKiller를 사용해야 함.
+                _LastScannerParamNo = -1;
 
-            // Rotary는 시작 트리거 미사용
-            _Scanner.SetControlMode(0);
-            UtilUnit.logUnit.SetLog(LogUnit.eLogType.DEBUG, MethodBase.GetCurrentMethod().Name, "[AutoRun] 외부 시작 트리거 DISABLE");
+                // 트럼프 TruDisk를 쓰기 위해서는 SetFirstPulseKiller를 사용해야 함.
 
-            #region MOTF Absolute Encoder 기준으로 초기화
-            // Set Rotate Center는 Ctrl명령, 처음 한번만 실행
-            _Scanner.SetRotateCenter(_Scanner.Config.MarkingOnTheFlyRotateCenterX, _Scanner.Config.MarkingOnTheFlyRotateCenterY);
+                // Rotary는 시작 트리거 미사용
+                _Scanner.SetControlMode(0);
+                UtilUnit.logUnit.SetLog(LogUnit.eLogType.DEBUG, MethodBase.GetCurrentMethod().Name, "[AutoRun] 외부 시작 트리거 DISABLE");
 
-            _Scanner.InitFly2D();   // X, Y 엔코더 리셋
-            _EncoderOverflowCount = 0;
+                #region MOTF Absolute Encoder 기준으로 초기화
+                // Set Rotate Center는 Ctrl명령, 처음 한번만 실행
+                _Scanner.SetRotateCenter(_Scanner.Config.MarkingOnTheFlyRotateCenterX, _Scanner.Config.MarkingOnTheFlyRotateCenterY);
 
-            // 현재 정지상태의 Rotary 엔코더 값을 읽어와서 저장
-            _RotaryEncoderOffset = GetRotaryCurrentPosition();   // m_abwRotaryEncoderOffset의 범위는 0 이상 360 미만
+                _Scanner.InitFly2D();   // X, Y 엔코더 리셋
+                _EncoderOverflowCount = 0;
 
-            InitRotaryOnTheFlyWeldingCount(_RotaryEncoderOffset, _RotaryJigCount, out _WeldingCount, out _WeldingJigNo);
+                // 현재 정지상태의 Rotary 엔코더 값을 읽어와서 저장
+                _RotaryEncoderOffset = GetRotaryCurrentPosition();   // m_abwRotaryEncoderOffset의 범위는 0 이상 360 미만
 
-            Log.I(string.Format($"ScannerUnit.InitRotaryOnTheFlyWeldingCount : m_abwRotaryEncoderOffset({_RotaryEncoderOffset}), weldingCount({_WeldingCount}), weldingJigNo({_WeldingJigNo}), rotaryJigCount({_RotaryJigCount})"));
+                InitRotaryOnTheFlyWeldingCount(_RotaryEncoderOffset, _RotaryJigCount, out _WeldingCount, out _WeldingJigNo);
+
+                Log.I(string.Format($"ScannerUnit.InitRotaryOnTheFlyWeldingCount : m_abwRotaryEncoderOffset({_RotaryEncoderOffset}), weldingCount({_WeldingCount}), weldingJigNo({_WeldingJigNo}), rotaryJigCount({_RotaryJigCount})"));
 
             // 용접 완료 대기 스캐너 List 리셋
-            ResetInputScannerList();
-            WaitingScannerList.Reset();
-            CompleteScannerList.Reset();
+            //ResetInputScannerList();
+            //WaitingScannerList.Reset();
+            //CompleteScannerList.Reset();
 
-            isTheFirstListWrite = false;     // 작업 시작 시 처음 2개의 List는 입력하고 시작한다
-            isTheSecondListWrite = false;
-            isTheFirstListExecute = true;   // 제일 첫 List는 ExecuteList 필요. 이후는 AutoChange
+            //isTheFirstListWrite = true;     // 작업 시작 시 처음 2개의 List는 입력하고 시작한다
+            //isTheSecondListWrite = true;
+            //isTheFirstListExecute = true;   // 제일 첫 List는 ExecuteList 필요. 이후는 AutoChange
 
             InitAutoRunBit();       // GetRotaryCurrentPosition() 호출 이후 AutoStatus True 변경
             #endregion
@@ -567,7 +577,6 @@ namespace ILSOS_ACW_H52A.Sequences
                 context.PutValue(ContextKey.KEY_SEQUENCE_RESULT, false);
                 return SEQ_INIT_CONDITION_ERROR;
             }
-
             Status.EquipmentMode = eEquipmentMode.AUTO;
 
             var startTime = DateTime.Now;
@@ -590,6 +599,7 @@ namespace ILSOS_ACW_H52A.Sequences
             // List가 실행 중이라면(ex : 엔코더 대기 상태 등), 반환값은 0, LoadList 할 수 없는 상태(List 실행 중이거나, 엔코더 대기 상태)
             // LoadList가 0보다 크면 다음 시퀀스 진행해야 함
             _InterfaceStartTime = DateTime.Now;
+
             while (!context.Stopped)
             {
                 if (_Scanner.LoadList(_WeldingScannerListNo) > 0)
@@ -618,7 +628,6 @@ namespace ILSOS_ACW_H52A.Sequences
             {
                 isTheFirstListWrite = false;
                 Log.I("Write the 1st scanner list");
-
             }
             else
             {
@@ -626,7 +635,6 @@ namespace ILSOS_ACW_H52A.Sequences
                 {
                     isTheSecondListWrite = false;
                     Log.I("Write the 2nd scanner list");
-
                 }
                 else
                 {
@@ -656,13 +664,8 @@ namespace ILSOS_ACW_H52A.Sequences
                         if (CompleteScannerList.CanExist)
                         {
                             isWeled = true;
-                            #region 용접 시간, 엔코더 측정/기록
-                            //_WeldInterval = DateTime.Now - _WeldEndTime;
-                            //_WeldEndTime = DateTime.Now;
-                            //double elapsedTime = _Scanner.GetTime();
-                            //_WeldingSpanTime = TimeSpan.FromSeconds(elapsedTime);  // Encoder 대기 넘어간 후의, 실제 스캐너 리스트 실행 시간
-                            //_WeldingStartTime = _WeldEndTime.Subtract(_WeldingSpanTime);
 
+                            #region 용접 시간, 엔코더 측정/기록
                             double elaspedTime = _Scanner.GetTime();
 
                             if (CompleteScannerList.WeldComplete)
@@ -684,16 +687,9 @@ namespace ILSOS_ACW_H52A.Sequences
                                 }
                                 UpdateProductCount(context);
                                 UpdateProductInfoForView();
-                                SaveCellAPD();
+                                SaveCellAPDData();
                             }
 
-                            //if (_SystemParameter.BypassModeLBAD == false) {
-                            //    if (_StreamLightLBAD.SendWeldingStop() == false) {
-                            //        Log.I(string.Format($"[LBAD Interface]SendWeldingStop null"));
-                            //        //return null;
-                            //    }
-                            //}
-
                             UtilUnit.logUnit.SetLog(LogUnit.eLogType.PRODUCT, MethodBase.GetCurrentMethod().Name, "UPDATE_WELDING_TIME;" + _WeldingSpanTime.TotalMilliseconds);
                             UtilUnit.logUnit.SetLog(LogUnit.eLogType.PRODUCT, MethodBase.GetCurrentMethod().Name, "UPDATE_PRODUCT_COUNT;" + _WeldEndTime.ToString("yyyy-MM-dd HH:mm:ss"));
 
@@ -714,6 +710,7 @@ namespace ILSOS_ACW_H52A.Sequences
                                 _Scanner.SaveRecord(DataFilePath);
                             }
                             #endregion
+
                         }
                     }
                 }
@@ -745,7 +742,7 @@ namespace ILSOS_ACW_H52A.Sequences
             return false;
         }
 
-        private string ReadyScannerList(SequenceContext context, string id, ICollection<string> branches, SequenceActionResult param)
+        private string CheckCanExist(SequenceContext context, string id, ICollection<string> branches, SequenceActionResult param)
         {
             Status.SetWorkingPosition(eWorkingPosition.UPLOADING_WELD_LIST);
 
@@ -776,23 +773,36 @@ namespace ILSOS_ACW_H52A.Sequences
 
             // 3개임으로 3으로 작성
             #region List 입력(용접 좌표 입력)
-            if (_WeldingJigNo == _RotaryJigCount)
-                _WeldingJigNo = 1;
-            else
-                _WeldingJigNo++;
+            //if (_WeldingJigNo == _RotaryJigCount)
+            //    _WeldingJigNo = 1;
+            //else
+            //    _WeldingJigNo++;
 
-            bool canExist;  // 지그 용접 수행 여부 확인
+            Log.I($"Welding Jig No : {_WeldingJigNo}");
 
-            if (UsePlcShotThemAll)
-            {
-                canExist = true;
+            (bool exist,int targetjigNo) canExist;  // 지그 용접 수행 여부 확인
+
+            if (UsePlcShotThemAll) {
+                canExist = (true, _WeldingJigNo);
                 Log.I("Settings - PLC : Shot Them All Mode");
-            }
-            else
+            } else {
                 canExist = GetRotaryCanExist(_WeldingJigNo);
+                _WeldingJigNo = canExist.targetjigNo;
+            }
 
             Log.I("Can Exist : " + canExist.ToString() + ", JigNo " + _WeldingJigNo + " ,CountNo " + _WeldingCount + ", StartAngle(Y) : " + _WeldingStartAngle);
 
+            if (canExist.exist)
+                return SEQ_SET_PARAMS_RECEIVE_CELL_INFO_SEQ;
+            else
+                return SEQ_EXECUTE_WELDING;
+
+            #endregion
+        }
+
+        private SequenceActionResult ReadyScannerList(SequenceContext context, string id, SequenceActionResult param)
+        {
+            #region 이력
             // 입력한 Scanner List를 완료대기열에 추가
             //SetInputScannerList(_WeldingScannerListNo, DateTime.Now, _WeldingCount, _WeldingStartAngle, _WeldingJigNo, _RotaryJigCount, canExist);
 
@@ -816,36 +826,31 @@ namespace ILSOS_ACW_H52A.Sequences
             //// SEQ_WAIT_WELDING_START 의 기능이 어떻게 되는 지 확인 후
             //// 건너뛰어도 되면 SEQ_EXECUTE_WELDING 으로 변경 해도 됨
             //return SEQ_WAIT_WELDING_START;
+            #endregion
 
-            if (canExist)
+            #region 용접할 Objects 선택
+            if (_WeldingJigNo - 1 < _ScannerCanvasUserCtrl.Model.Layers.Length)
             {
-                #region 용접할 Objects 선택
-                if (_WeldingJigNo - 1 < _ScannerCanvasUserCtrl.Model.Layers.Length)
-                {
-                    _SelectedDrawObjectList = _ScannerCanvasUserCtrl.Model.Layers[_WeldingJigNo - 1].Objects;
-                    Log.I(string.Format("Page 불러오기 : [{0}])", _WeldingJigNo - 1));
-                }
-                else
-                {
-                    _SelectedDrawObjectList = _ScannerCanvasUserCtrl.Model.Layers[0].Objects;
-                    Log.I(string.Format("Page 불러오기 : [0])"));
-                }
-                #endregion
-                // 입력한 Scanner List를 완료대기열에 추가
-                // Won : GetProcessingWeldingData().WorkLotId 는 CellTrakcer로 부터 받은 상태의 LotId
-                // GetProcessingWeldingData().LotId 는 AutorunView에 표기할 용접이 완료 된 LotID
-                string LotId = Status.GetProcessingWeldingData().WorkLotId;            // CellTracker로 부터 WorkLotID, WorkCellID 받는 구문 추가 후 해당 데이터로 입력 필요
-                string CellId = Status.GetProcessingWeldingData().WorkCellId;
-                SetInputScannerList(_WeldingScannerListNo, DateTime.Now, _WeldingCount, _WeldingStartAngle, _WeldingJigNo, _RotaryJigCount, canExist, LotId, CellId);
-                _RecipeNo = _RecipeManager.ActivatedRecipe().Id;
-
-                SetWeldingData();
+                _SelectedDrawObjectList = _ScannerCanvasUserCtrl.Model.Layers[_WeldingJigNo - 1].Objects;
+                Log.I(string.Format("Page 불러오기 : [{0}])", _WeldingJigNo - 1));
             }
             else
             {
-                return SEQ_EXECUTE_WELDING;
+                _SelectedDrawObjectList = _ScannerCanvasUserCtrl.Model.Layers[0].Objects;
+                Log.I(string.Format("Page 불러오기 : [0])"));
             }
-            return SEQ_SET_PARAMS_UPLOAD_WELDING_LIST_SEQ;
+            #endregion
+            // 입력한 Scanner List를 완료대기열에 추가
+            // Won : GetProcessingWeldingData().WorkLotId 는 CellTrakcer로 부터 받은 상태의 LotId
+            // GetProcessingWeldingData().LotId 는 AutorunView에 표기할 용접이 완료 된 LotID
+            string LotId = Status.GetProcessingWeldingData().WorkLotId;            // CellTracker로 부터 WorkLotID, WorkCellID 받는 구문 추가 후 해당 데이터로 입력 필요
+            string CellId = Status.GetProcessingWeldingData().WorkCellId;
+            SetInputScannerList(_WeldingScannerListNo, DateTime.Now, _WeldingCount, _WeldingStartAngle, _WeldingJigNo, _RotaryJigCount, true, LotId, CellId);
+            _RecipeNo = _RecipeManager.ActivatedRecipe().Id;
+
+            SetWeldingData();
+
+            return SequenceAction.Ok();
             #endregion
         }
 
@@ -875,6 +880,7 @@ namespace ILSOS_ACW_H52A.Sequences
             }
         }
 
+
         public void WaitForEncoderNextRotarySection(int weldingCount, int rotaryJigCount, double rotaryAngleOffset, double encoderResetOffset, out double sectionStartAngle)
         {
             // 한 바퀴당 지그 숫자에 따른 변경
@@ -905,9 +911,19 @@ namespace ILSOS_ACW_H52A.Sequences
 
             _Scanner.WaitForEncoderRotateRange(encoderAllowedMinDegree, encoderAllowedMaxDegree, sectionStartAngle, sectionEndAngle);
         }
-
-        public bool GetRotaryCanExist(int jigNo)
+        
+        public (bool isExist, int targetJigNo) GetRotaryCanExist(int JigNo)
         {
+            // PLC 용접 대상 비트를 확인한다.
+            for (int offset = 1; offset <= _RotaryJigCount; offset++) {
+                int checkJigNo = (JigNo + offset) % _RotaryJigCount; // 0~15번 비트를 확인하기 위함
+                
+                // 비트가 켜져있는 것이 확인이 된다면,
+                if (_PLC.ReadBit((int)eBitInput.PLC_USE_WELD_JIG_1 + checkJigNo).data) {
+                    return (true, checkJigNo);
+                }
+            }
+            return (false, 0);
             #region 지그 16개 요청기록 로그 남기기, 빠져나간 캔에 대한 Complete Bit 초기화
             string result = "";
 
@@ -1156,11 +1172,10 @@ namespace ILSOS_ACW_H52A.Sequences
 
             return SequenceAction.Ok();
         }
-
-        private static string CheckCycleStop(SequenceContext context, string id, ICollection<string> branches, SequenceActionResult param)
+        public static bool CycleStopTest = false;
+        private string CheckCycleStop(SequenceContext context, string id, ICollection<string> branches, SequenceActionResult param)
         {
             Status.SetWorkingPosition(eWorkingPosition.CHECKING_CYCLE);
-
             // TODO: 확인 필요, CybleStop 에 대한 내용, cycle stop 여부 가져오기
             //bCycleStop = GetCycleStopRequest();
 
@@ -1168,17 +1183,13 @@ namespace ILSOS_ACW_H52A.Sequences
             //Jin : cycleStop 명령을 용접 프로그램에서 할 경우가 현재는 없음..
             // CheckCycleStop 노드와 Complete 노드 사이 다른 노드가 필요하다면 해당 노드를 CheckCycleStop 노드 위로 올리자
             bool cycleStop = false;
-            if (cycleStop)
-            {
+            if (cycleStop || CycleStopTest)
                 return SEQ_SAVE_RESULT_DATA;
-            }
             else
-            {
                 return SEQ_CHECK_LOAD_COMPLETE;
-            }
         }
+
         // END ALL
-        #endregion
         private static string CheckCanWelded(SequenceContext context, string id, ICollection<string> branches, SequenceActionResult param)
         {
             if (isWeled)
@@ -1187,19 +1198,19 @@ namespace ILSOS_ACW_H52A.Sequences
                 return SEQ_CHECK_CYCLE_STOP;
         }
 
-        private void SaveCellAPD()
+        private void SaveCellAPDData()
         {
             if (Status.GetProcessingWeldingData().APD.Count > 0)
             {
                 string directoryPath = "D:\\ILSOSConfig\\APD_History";
-                string fileName = DateTime.Now.ToString("HH") + "_CellAPD";
+                string fileName = DateTime.Now.ToString("HHmmss.fff") + "_" + Status.GetProcessingWeldingData().APD.First().CellID;
                 string fullPath = Path.Combine(directoryPath, Status.GetProcessingWeldingData().APD.First().Date.ToString("yyyy-MM-dd"), fileName);
                 Status.GetProcessingWeldingData().APD.CreateFiles(fullPath);
+                Log.I($"Save Cell APD Data. File Name : {fileName}");
             }
         }
         private SequenceActionResult SaveResultData(SequenceContext context, string id, SequenceActionResult param)
         {
-           
             context.PutValue(ContextKey.KEY_SEQUENCE_RESULT, true);
             return SequenceAction.Ok();
         }

Machines/ILSOS_CCW_H52A/Device/PLC/PLCContoller.Config.cs

@@ -1,15 +1,11 @@
 using Aurora;
-using Aurora.Api;
 using AuroraPLC;
-using Hermes;
 using System;
 using System.Collections.Generic;
-using System.Diagnostics;
 using System.Linq;
 using System.Text;
 using System.Threading.Tasks;
 using WeldingCommon.Devices;
-using static System.Windows.Forms.VisualStyles.VisualStyleElement.Rebar;
 
 namespace ILSOS_CCW_H52A.Device
 {
@@ -17,183 +13,7 @@ namespace ILSOS_CCW_H52A.Device
     {
         public PLCControllerCCWH52A(string deviceId, ePLCNetType plcNetType, PLCMMapFileType fileType, IAuroraEnvironment aurora) : base(deviceId, plcNetType, fileType, aurora)
         {
-        }
 
-        protected override int DoActivate(IDeviceConfig config)
-        {
-            var ret = base.DoActivate(config);
-            if (ret == E1.OK && IsSimul) {
-                //WriteBit((int)eBitInput.PLC_AUTO_STATUS, true, ePLCDevice.B, false);
-                //WriteBit((int)eBitInput.PLC_AUTO_REQ, true, ePLCDevice.B, false);
-                SetMonitoringService(EquipmentSimulator, 1);
-            }
-            return ret;
-        }
-
-        protected override int DoDeactivate()
-        {
-            StopMonitoringService();
-
-            var res = base.DoDeactivate();
-
-            if (res != E1.OK) {
-                Log.E("Deactivate is failed");
-                return res;
-            }
-
-            return res;
-        }
-
-        // -----------------------------
-        // Simulation state
-        // -----------------------------
-        private const int PLC_CURRENT_POS_1_ADDR = 4;      // 기존 (mod 0~360)
-
-        private readonly Random _rand = new Random();
-
-        private readonly Stopwatch _sw = Stopwatch.StartNew();
-        private long _lastMs = -1;
-
-        private const int RotaryJigCount = 16;
-        private const double JigPerMsec = 300;
-        private const double DegreePerRev = 360.0;
-        private const double OneCycleMsec = JigPerMsec * RotaryJigCount;
-        private const double DegreePerMsec = DegreePerRev / OneCycleMsec;
-        private const double DegreePerJig = DegreePerRev / RotaryJigCount; // 22.5
-        private const double HalfDegreePerJig = DegreePerJig / 2.0;        // 11.25
-
-        // PLC_CURRENT_POS_1 = degree * 100000
-        private const double PlcAngleScale = 100_000.0;
-
-        // 시퀀스가 "다음 지그"를 미리 읽으므로 안전하게 2칸 선행(권장)
-        private const int LeadSectors = 2;
-
-        // Motor position
-        private readonly object _absLock = new object();
-        public double GetSimAbsDeg()
-        {
-            long value = System.Threading.Interlocked.Read(ref _angleAbsDeg);
-            return value / 100000.0;
-        }
-        private long _angleAbsDeg = 0; // 누적 각도(계속 증가)
-
-        private double _angleModDeg = 0.0; // 0~360 랩핑 각도
-
-        // PLC USE_WELD_JIG bits
-        private readonly bool[] _canExist = new bool[RotaryJigCount];
-        private readonly bool[] _decided = new bool[RotaryJigCount]; // 이번 회전에서 해당 섹터가 결정됐는지
-        private int _prevSector = -1;
-
-        private static void FillBool(bool[] arr, bool value)
-        {
-            if (arr == null)
-                return;
-            for (int i = 0; i < arr.Length; i++)
-                arr[i] = value;
-        }
-
-        private static int Mod(int x, int m)
-        {
-            int r = x % m;
-            return (r < 0) ? (r + m) : r;
-        }
-
-        private int GetSectorFromAngle(double angleDeg)
-        {
-            // 시퀀스의 (angle + half)/per와 동일한 기준으로 섹터 결정
-            return (int)((angleDeg + HalfDegreePerJig) / DegreePerJig) % RotaryJigCount;
-        }
-
-        private void OnSectorChanged(int prev, int curr)
-        {
-            // 첫 진입
-            if (prev < 0) {
-                // 처음 시작 시에는 전부 OFF 상태에서 시작
-                FillBool(_canExist, false);
-                FillBool(_decided, false);
-            } else {
-                // 랩(15 -> 0) 감지: 새 바퀴 시작으로 보고 "지나간 영역 OFF"를 강하게 반영
-                if (prev == RotaryJigCount - 1 && curr == 0) {
-                    FillBool(_canExist, false);
-                    FillBool(_decided, false);
-                } else {
-                    // 지나간 섹터(prev)는 OFF 처리
-                    _canExist[prev] = false;
-                    _decided[prev] = false; // 다음 회전에서 다시 결정되도록
-                }
-            }
-
-            // 시퀀스는 "다음 지그"를 읽으므로 curr+1부터 선행 결정
-            for (int k = 1; k <= LeadSectors; k++) {
-                int s = Mod(curr + k, RotaryJigCount);
-
-                if (!_decided[s]) {
-                    // 7/8 확률 ON (0~7 중 0만 OFF로 만들려면 >0)
-                    bool isCanExist = true;// (_rand.Next(0, 8) > 0);
-                    _canExist[s] = isCanExist;
-                    _decided[s] = true;
-                }
-            }
-
-            // 현재 섹터(curr)도 켜고 싶다면 여기서 결정 가능
-        }
-
-        private void EquipmentSimulator()
-        {
-            if (!ReadBit((int)eBitOutput.PC_AUTO_STATUS, ePLCDevice.B, false).data)
-                return;
-
-            long now = _sw.ElapsedMilliseconds;
-            if (_lastMs < 0)
-                _lastMs = now;
-
-            long dtMs = now - _lastMs;
-            if (dtMs < 0)
-                dtMs = 0;
-
-            if (dtMs > 100)
-                dtMs = 100;
-
-            _lastMs = now;
-
-            // abs 누적각 (시뮬 전용)
-            long deltaScaled = (long)Math.Round(DegreePerMsec * dtMs * 100000.0);
-            System.Threading.Interlocked.Add(ref _angleAbsDeg, deltaScaled);
-
-            double absDeg = GetSimAbsDeg();
-            _angleModDeg = absDeg % DegreePerRev;
-            if (_angleModDeg < 0)
-                _angleModDeg += DegreePerRev;
-
-            // mod 각도
-            int plcAngleMod = (int)Math.Round(_angleModDeg * PlcAngleScale);
-            WriteDWord(PLC_CURRENT_POS_1_ADDR, plcAngleMod, ePLCDevice.W, false);
-
-            // 섹터 변경/비트 처리 로직은 기존 그대로
-            int sectorNow = GetSectorFromAngle(_angleModDeg);
-            if (sectorNow != _prevSector) {
-                OnSectorChanged(_prevSector, sectorNow);
-                _prevSector = sectorNow;
-            }
-
-            WriteBitBlock((int)eBitInput.PLC_USE_WELD_JIG_1, RotaryJigCount, _canExist, ePLCDevice.B, false);
-        }
-
-        public void ResetSimulator()
-        {
-            _lastMs = -1;
-            System.Threading.Interlocked.Exchange(ref _angleAbsDeg, 0);
-            _angleModDeg = 0.0;
-
-            FillBool(_canExist, false);
-            FillBool(_decided, false);
-            _prevSector = -1;
-
-            // 각도 초기화 반영
-            WriteDWord(PLC_CURRENT_POS_1_ADDR, 0, ePLCDevice.W, false);
-
-            // 지그 비트 초기화 반영
-            WriteBitBlock((int)eBitInput.PLC_USE_WELD_JIG_1, RotaryJigCount, _canExist, ePLCDevice.B, false);
         }
     }
 }

Machines/ILSOS_CCW_H52A/Device/PLC/PLCController.Logic.cs

@@ -1,6 +1,4 @@
-using Aurora.Util.HislogPlus;
-using AuroraPLC;
-using Hermes;
+using Hermes;
 using System;
 using System.Collections.Generic;
 using System.Linq;
@@ -12,60 +10,6 @@ namespace ILSOS_CCW_H52A.Device
 {
     partial class PLCControllerCCWH52A
     {
-        public (int err, bool data) ReadBit(eBitInput inputAddr, ePLCDevice device = ePLCDevice.B, bool isInput = true) => base.ReadBit((int)inputAddr, device, isInput);
-        public int WriteBit(eBitOutput outputAddr, bool onOff, ePLCDevice device = ePLCDevice.B, bool isOutput = true) => base.WriteBit((int)outputAddr, onOff, device, isOutput);
-
-        public (int err, short data) ReadWord(eWordInput inputAddr, ePLCDevice device = ePLCDevice.W, bool isInput = true) => base.ReadWord((int)inputAddr, device, isInput);
-        public int WriteWord(eWordOutput outputAddr, short shData, ePLCDevice device = ePLCDevice.W, bool isOutput = true) => base.WriteWord((int)outputAddr, shData, device, isOutput);
-
-        public (int err, int data) ReadDWord(eWordInput inputAddr, ePLCDevice device = ePLCDevice.W, bool isInput = true) => base.ReadDWord((int)inputAddr, device, isInput);
-        public int WriteDWord(eWordOutput outputAddr, int iVal, ePLCDevice device = ePLCDevice.W, bool isOutput = true) => base.WriteDWord((int)outputAddr, iVal, device, isOutput);
-
-        public (int err, short[] datas) ReadWords(eWordInput startAddress, eWordInput endAddress, ePLCDevice device = ePLCDevice.W, bool isInput = true) => base.ReadWordBlock((int)startAddress, endAddress - startAddress + 1, device, isInput);
-        public int WriteWords(eWordOutput startAddress, eWordOutput endAddress, short[] data, ePLCDevice device = ePLCDevice.W, bool isOutput = true) => base.WriteWordBlock((int)startAddress, endAddress - startAddress, data, device, isOutput);
-
-        public string ReadASCII(eWordInput start, eWordInput end)
-        {
-            StringBuilder sb = new StringBuilder();
-            var words = ReadWords(start, end);
-            foreach (var word in words.datas)
-                sb.Append(Conv_ReadData(PLCBase.eDataType.Type_Ascii, word, 0, false, false));
-
-            return sb.ToString();
-        }
-        public int WriteWordToBit((eWordOutput addrOffset, int bitNo) address, bool on)
-        {
-            var value = base.ReadWord((int)address.addrOffset, ePLCDevice.W, false);
-            short current = value.data;
-
-            if (on) {
-                current |= (short)(1 << address.bitNo);
-            } else {
-                current &= (short)~(1 << address.bitNo);
-            }
-
-            return base.WriteWord((int)address.addrOffset, current, ePLCDevice.W);
-        }
-
-        public bool ReadWordToBit((eWordInput addrOffset, int bitNo) address)
-        {
-            short current = ReadWord(address.addrOffset).data;
-            return (current & (1 << address.bitNo)) != 0;
-        }
-        public IEnumerable<bool> ReadWordToBits(eWordInput address, bool isLowerFirst = true)
-        {
-            var ret = new List<bool>();
-            int word = ReadWord(address).data;
-            if (isLowerFirst) {
-                for (int idx = 0; idx < 15; idx++)
-                    ret.Add((word & (1 << idx)) != 0);
-            } else {
-                for (int idx = 15; idx > 0; idx--)
-                    ret.Add((word & (1 << idx)) != 0);
-            }
-            return ret;
-        }
-
         public override void MappingPLCAddr()
         {
             PLC_AUTO_REQAddr = (int)eBitInput.PLC_AUTO_REQ;
@@ -148,17 +92,5 @@ namespace ILSOS_CCW_H52A.Device
             else
                 return 1000;
         }
-
-        public int ToggleBit(eBitInput readBit, eBitOutput writeBit)
-        {
-            int ret = 0;
-            if (ReadBit(readBit).data)
-                ret = WriteBit(writeBit, false);
-            else
-                ret = WriteBit(writeBit, true);
-
-            Log.I($"{Enum.GetName(typeof(eBitOutput), writeBit)} -> {!ReadBit(readBit).data}");
-            return ret;
-        }
     }
 }

Machines/ILSOS_CCW_H52A/Device/Scanner/ScannerCCWH52A.cs

@@ -1,66 +0,0 @@
-using Aurora;
-using Aurora.Api;
-using AuroraLaserScanner;
-using Hermes;
-using System;
-using System.Collections.Generic;
-using System.Diagnostics;
-using System.Linq;
-using System.Text;
-using System.Threading.Tasks;
-using System.Windows;
-using WeldingCommon;
-using static ILSOS_CCW_H52A.Device.PLCControllerCCWH52A;
-
-namespace ILSOS_CCW_H52A.Device
-{
-    public class ScannerCCWH52A : Scanner
-    {
-        // -----------------------------
-        // Simulation state
-        // -----------------------------
-        private PLCControllerCCWH52A _plc;
-
-        public ScannerCCWH52A(string deviceId) : base(deviceId)
-        {
-        }
-
-        protected override int DoActivate(IDeviceConfig config)
-        {
-            var ret = base.DoActivate(config);
-            if (ret == E1.OK && IsSimul) {
-                if (_plc == null) {
-                    _plc = Application.Current.AuroraEnv().DeviceManager[CommonDeviceIds.PLCDevice] as PLCControllerCCWH52A;
-                    return E2.ABORTED;
-                }
-
-                // 값의 동기화가 필요해서 추가 함
-                if (!_plc.IsConnected && !_plc.IsSimul)
-                    return E2.ABORTED;
-
-                var core = _scannerObj as ScannerSimul;
-                core.PLCReadBit = _plc.ReadBit;
-                core.PLCReadWord = _plc.ReadWord;
-                core.PLCReadDWord = _plc.ReadDWord;
-                core.PLCGetAbsDeg = _plc.GetSimAbsDeg;
-                //_plc.ResetSimulator();
-                core.ResetSim();
-                core.TrySyncAbsAngleToPlcNow();
-
-                SetMonitoringService((_scannerObj as ScannerSimul).EquipmentSimulator, 1);
-            }
-            return ret;
-        }
-
-        protected override int DoDeactivate()
-        {
-            var ret = base.DoDeactivate();
-            if (ret == E1.OK && IsSimul){
-                var core = _scannerObj as ScannerSimul;
-                StopMonitoringService();
-            }
-
-            return ret;
-        }
-    }
-}

Machines/ILSOS_CCW_H52A/Device/Scanner/ScannerList.cs

@@ -66,7 +66,6 @@ namespace ILSOS_CCW_H52A.Device
             public bool CheckSendCellinfo { get; set; }
             public bool CheckSendPLCLaserPower { get; set; }
             public bool ReportComplete { get; set; }
-            public void SetReportComplete(bool comp) => ReportComplete = comp;
 
             public override string ToString() => string.Format("{0},WriteTime({1}),WeldingCount({2}),StartAngle({3}),JigNo({4}),CanExist({5}),LotId({6}),CellId({7})",
                 ListNo, WriteTime.ToString("HHmmss.fff"), WeldingCount, StartAngle, JigNo, CanExist, LotId, CellId);

Machines/ILSOS_CCW_H52A/EquipmentSetup.cs

@@ -11,7 +11,6 @@ using AuroraCellTracker.Views;
 using AuroraIO;
 using AuroraIO.View;
 using AuroraLaser;
-using AuroraLaserScanner;
 using AuroraLBAD;
 using AuroraLBAD.Services;
 using AuroraOCT;
@@ -141,7 +140,6 @@ namespace ILSOS_CCW_H52A
 
         public override void RegisterDevices(IDeviceRegistry registry)
         {
-            registry.Register(CommonDeviceIds.Scanner, () => new ScannerCCWH52A(CommonDeviceIds.Scanner), new ScannerConfig());
             base.RegisterDevices(registry);
 
             var isSimul = ApplicationExt.IsSimulation;

Machines/ILSOS_CCW_H52A/ILSOS_CCW_H52A.csproj

@@ -98,7 +98,6 @@
     <Compile Include="Device\PLC\PLCContoller.Config.cs" />
     <Compile Include="Device\PLC\PLCController.Address.cs" />
     <Compile Include="Device\PLC\PLCController.Logic.cs" />
-    <Compile Include="Device\Scanner\ScannerCCWH52A.cs" />
     <Compile Include="Device\Scanner\ScannerList.cs" />
     <Compile Include="EquipDef.cs" />
     <Compile Include="EquipmentSetup.cs" />
@@ -106,10 +105,7 @@
     <Compile Include="Recipes\RecipeEventHelper.cs" />
     <Compile Include="RMS\EDC.cs" />
     <Compile Include="Sequences\Monitoring\AlarmMonitoring.cs" />
-    <Compile Include="Sequences\ProcessObjects\ProcessManager.cs" />
-    <Compile Include="Sequences\ProcessObjects\ReceivedCellInfo.cs" />
     <Compile Include="Sequences\SeqAutoRunCCWH52A.cs" />
-    <Compile Include="Sequences\SeqAutoRunRMOTF.cs" />
     <Compile Include="Sequences\SequenceContextEx.cs" />
     <Compile Include="Views\Main\UCMainAutoRun.xaml.cs">
       <DependentUpon>UCMainAutoRun.xaml</DependentUpon>

Machines/ILSOS_CCW_H52A/Sequences/ProcessObjects/ProcessManager.cs

@@ -1,126 +0,0 @@
-using Aurora;
-using Aurora.Api;
-using Aurora.Util.HislogPlus;
-using AuroraLaserScanner;
-using AuroraPLC;
-using ILSOS_CCW_H52A.Device;
-using System;
-using System.Collections.Concurrent;
-using System.Collections.Generic;
-using System.Linq;
-using System.Reactive.Linq;
-using System.Text;
-using System.Threading.Tasks;
-using System.Windows;
-using WeldingCommon;
-using WeldingCommon.Data;
-using static ILSOS_CCW_H52A.Device.PLCControllerCCWH52A;
-
-namespace ILSOS_CCW_H52A.Sequences.ProcessObjects
-{
-    public class ProcessManager
-    {
-        private static ProcessManager _Instance;
-        public static ProcessManager Instance {
-            get {
-                if (_Instance is null) {
-                    _Instance = new ProcessManager();
-                }
-                return _Instance;
-            }
-        }
-        private IAuroraEnvironment _env;
-        private PLCControllerCCWH52A _plc;
-        private ScannerCCWH52A _scanner;
-
-        private bool usedAnalyzerLog = false;
-        private readonly Logger _log = new Logger("ProcessManager");
-
-        public const double compensateEncoderReset = 0.015;  // 엔코더 리셋 보상 각도 설정(70도/sec 기준 약 0.015도)
-        public const int RotaryJigCount = 16;
-        public const int RotaryMaxAngle = 360;
-        public double DegreePerJig { get => RotaryMaxAngle / RotaryJigCount; }
-        public double HalfDegreePerJig { get => DegreePerJig / 2; }
-
-        //public ConcurrentQueue<ReceivedCellInfo>
-        public void Init(IAuroraEnvironment env)
-        {
-            _env = env;
-            _plc = _env.DeviceManager[DeviceIds.PLCDevice] as PLCControllerCCWH52A;
-            _scanner = _env.DeviceManager[DeviceIds.Scanner] as ScannerCCWH52A;
-        }
-        public IEnumerable<bool> CheckRotaryState()
-        {
-            List<bool> rotaryStates = new List<bool>();
-            for (int i = 0; i < RotaryJigCount; i++) {
-                var rotaryProcessState = _plc.ReadBit(eBitInput.PLC_USE_WELD_JIG_1 + i).data;
-                rotaryStates.Add(rotaryProcessState);
-                //if (rotaryProcessState == false)
-                //    _plc.ToggleBit(eBitInput.PLC_USE_WELD_JIG_1 + i, eBitOutput.PC_WELD_COMPLETE_1 + i);
-            }
-
-            if (usedAnalyzerLog) {
-                StringBuilder sb = new StringBuilder();
-                rotaryStates.ForEach(x => sb.Append($"{x} "));
-                _log.D($"Check Rotary State : {sb.ToString()}");
-            }
-
-            return rotaryStates;
-        }
-
-        public bool GetRotaryCanExist(int jigNo)
-        {
-            if (jigNo == 0)
-                jigNo = 1;
-
-            if (jigNo <= RotaryJigCount)
-                return _plc.ReadBit(eBitInput.PLC_USE_WELD_JIG_1 + (jigNo - 1)).data;
-            else
-                return false;
-        }
-
-        /// <summary>
-        /// Rotary의 현재 위치정보를 0~360로 전달함
-        /// </summary>
-        public double GetRotaryCurrentPosition(bool isView360 = true)
-        {
-            try {
-                double finalValue = Convert.ToDouble(_plc.ReadDWord(eWordInput.PLC_CURRENT_POS_1).data / 100_000f);
-                finalValue += _scanner.Config.RotaryEncoderOffset;
-
-                if (isView360) {
-                    if (RotaryMaxAngle <= finalValue) {
-                        while (RotaryMaxAngle <= finalValue) {
-                            finalValue -= RotaryMaxAngle;
-                        }
-                    }
-                    else if (finalValue < 0) {
-                        while (finalValue < 0) {
-                            finalValue += RotaryMaxAngle;
-                        }
-                    }
-                }
-
-                return finalValue;
-            }
-            catch {
-                return -9999.9999;
-            }
-        }
-
-        /// <summary>
-        /// 중심 기준 가장 가까운 지그 번호(내림 연산)
-        /// <param name="HalfDegreePerJig">내림 카운팅을 중심 기준 값</param>
-        /// </summary>
-        /// <returns></returns>
-        public int getCurrentJigNo() => (int)((GetRotaryCurrentPosition(isView360:true) + HalfDegreePerJig) / DegreePerJig) + 1;
-
-        /// <summary>
-        /// 360도 이상으로 준다고하면 Welding Count를 가져올 수 있음 2word = 2147483.647 / 3600 = 596 >> 596*16 = 9_536까지 카운팅 가능함
-        /// <param name="HalfDegreePerJig">내림 카운팅을 중심 기준 값</param>
-        /// </summary>
-        /// <returns></returns>
-        public int getWeldingCount() => (int)((GetRotaryCurrentPosition(isView360:false) + HalfDegreePerJig) / DegreePerJig);
-
-    }
-}

Machines/ILSOS_CCW_H52A/Sequences/ProcessObjects/ReceivedCellInfo.cs

@@ -1,16 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using System.Threading.Tasks;
-
-namespace ILSOS_CCW_H52A.Sequences.ProcessObjects
-{
-    public class ReceivedCellInfo
-    {
-
-        public ReceivedCellInfo() {
-
-        }
-    }
-}

WeldingComponents/WeldingCommon/CommonEquipmentSetup.cs

@@ -236,7 +236,7 @@ namespace WeldingCommon
             //registry.Register(CommonDeviceIds.Laser, () => new Laser(CommonDeviceIds.Laser, isSimul), new LaserConfig(),
             //    device => new UCLaserDevice() { DataContext = new UCLaserDeviceViewModel(AuroraEnv, CommonDeviceIds.Laser) });
 
-            //registry.Register(CommonDeviceIds.Scanner, () => new Scanner(CommonDeviceIds.Scanner), new ScannerConfig());
+            registry.Register(CommonDeviceIds.Scanner, () => new Scanner(CommonDeviceIds.Scanner), new ScannerConfig());
             //registry.Register(CommonDeviceIds.SmcChiller, () => new SmcChiller(CommonDeviceIds.SmcChiller, 0, isSimul), new SmcChiller.Config(),
             //                device => new UCSMCChillerDevice() { DataContext = new UCSMCChillerDeviceViewModel(AuroraEnv, CommonDeviceIds.SmcChiller) });
             registry.Register(CommonDeviceIds.SmcChiller, () => new SmcChiller(CommonDeviceIds.SmcChiller), new SmcChillerConfig(),

WeldingComponents/WeldingCommon/Data/ActualProcessData.cs

@@ -26,10 +26,9 @@ namespace WeldingCommon.Data
         {
             table.Columns.Add("Date", typeof(string));
             table.Columns.Add("Time", typeof(string));
+            table.Columns.Add(nameof(ActualProcessUnit.WeldType), typeof(string));
             table.Columns.Add(nameof(ActualProcessUnit.LotID), typeof(string));
             table.Columns.Add(nameof(ActualProcessUnit.CellID), typeof(string));
-            table.Columns.Add(nameof(ActualProcessUnit.HeadNo), typeof(string));
-            table.Columns.Add(nameof(ActualProcessUnit.WeldType), typeof(string));
             table.Columns.Add(nameof(ActualProcessUnit.EncoderCheck), typeof(bool));
             table.Columns.Add(nameof(ActualProcessUnit.StartPointX), typeof(double));
             table.Columns.Add(nameof(ActualProcessUnit.StartPointY), typeof(double));
@@ -62,10 +61,10 @@ namespace WeldingCommon.Data
         protected override void InsertItem(int index, ActualProcessUnit item)
         {
             base.InsertItem(index, item);
-            table.Rows.Add(item.Date.ToString("yyyy-MM-dd"), item.Date.ToString("HH:mm:ss.fff"), item.LotID, item.CellID, item.HeadNo, item.WeldType, item.EncoderCheck,
-                           item.StartPointX, item.StartPointY, item.EndPointX, item.EndPointY,
-                           item.WeldCondition, item.LaserOnDelay, item.LaserOffDelay, item.JumpDelay, item.MarkDelay,
-                           item.PolygonDelay, item.Power, item.JumpSpeed, item.MarkSpeed, item.JumpX,
+            table.Rows.Add(item.Date.ToString("yyyy-MM-dd"), item.Date.ToString("HH:mm:ss.fff"),item.WeldType, item.LotID, item.CellID, item.EncoderCheck, 
+                           item.StartPointX, item.StartPointY, item.EndPointX, item.EndPointY, 
+                           item.WeldCondition, item.LaserOnDelay, item.LaserOffDelay, item.JumpDelay, item.MarkDelay, 
+                           item.PolygonDelay, item.Power, item.JumpSpeed, item.MarkSpeed, item.JumpX, 
                            item.JumpY);
         }
 
@@ -80,14 +79,12 @@ namespace WeldingCommon.Data
     {
         public DateTime Date { get => _Date; set => SetProperty(ref _Date, value); }
         private DateTime _Date;
-        public string LotID { get => _LodID; set => SetProperty(ref _LodID, value); }
-        private string _LodID;
-        public string CellID { get => _CellID; set => SetProperty(ref _CellID, value); }
-        private string _CellID;
-        public string HeadNo { get => _HeadNo; set => SetProperty(ref _HeadNo, value); }
-        private string _HeadNo;
+        public string LotID { get => Status.GetProcessingWeldingData().LotId; }
+        public string CellID { get => Status.GetProcessingWeldingData().CellId; }
+
         public string WeldType { get => _WeldType; set => SetProperty(ref _WeldType, value); }
         private string _WeldType;
+
         public bool EncoderCheck { get => _EncoderCheck; set => SetProperty(ref _EncoderCheck, value); }
         private bool _EncoderCheck;
         public double StartPointX { get => _StartPointX; set => SetProperty(ref _StartPointX, value); }

WeldingComponents/WeldingCommon/Devices/PLC/PLCController.Config.cs

@@ -20,7 +20,7 @@ namespace WeldingCommon.Devices
     public abstract partial class PLCController : PLCBase
     {
         // Log 사용 방법
-        protected static Logger Log = new Logger("PLCController");
+        static Logger Log = new Logger("PLCController");
 
         //static Logger EventLog = new Logger(eMsg_TYPE.PLC.ToString(), "Event");
 

WeldingComponents/WeldingCommon/EquipDefCommon.cs

@@ -108,11 +108,11 @@
         public const string Laser = "Laser";
         public const string LaserIO = "LaserIO";
 
+        public const string Scanner = "Scanner";
         public const string SmcChiller = "SmcChiller";
         public const string PowerMeter = "PowerMeter";
         public const string Light = "Light";    // Camera Light Controller
         public const string PLCDevice = "PLC";
-        public const string Scanner = "Scanner";
         public const string IODevice = "IO_Board";
 
         public const string CellTracker = "CellTracker";

WeldingComponents/WeldingCommon/Sequences/Calibration/SeqScannerCalibration.cs

@@ -345,22 +345,27 @@ namespace WeldingCommon.Sequences
                     _FindPatternCount = 0;
                     return SEQ_DECISION_CHECK_OFFSET;
                 }
-            }
-
-            if (_InitParam.Is1StepCalibration) {
-                _Is1stepCount++;
-                Log.I(string.Format($"Is1stepCount : {_Is1stepCount} "));
-                return SEQ_FIND_PATTERN;
-            }
-
-            if (_NotFoundCount > 5) {
-                Log.I(string.Format($"Pattern Not Found. NotFoundCount OverFlow. Next Sequnece : SetVisionPositionFailed."));
+            } else {
+                if (_InitParam.Is1StepCalibration)
+                {
+                    _Is1stepCount++;
+                    Log.I(string.Format($"Is1stepCount : {_Is1stepCount} "));
+                    return SEQ_FIND_PATTERN;
+                }
+                else
+                {
+                    if(_NotFoundCount > 5)
+                    {
+                        Log.I(string.Format($"Pattern Not Found. NotFoundCount OverFlow. Next Sequnece : SetVisionPositionFailed."));
                 return SEQ_SET_VISION_POSITION_FAILED;
             }
-            else {
-                _NotFoundCount++;
-                Log.I(string.Format($"NotFoundCount : {_NotFoundCount} "));
-                return SEQ_FIND_PATTERN;
+                    else
+                    {
+                        _NotFoundCount++;
+                        Log.I(string.Format($"NotFoundCount : {_NotFoundCount} "));
+                        return SEQ_FIND_PATTERN;
+                    }
+                }
             }
         }
 
@@ -407,15 +412,12 @@ namespace WeldingCommon.Sequences
         {
             Log.I(string.Format($"Find Pattern Result Offset:[{_PatternOffsetX},{_PatternOffsetY}] Score:[{_Score}]"));
 
-            // Pattern Find OK
             if (Math.Max(Math.Abs(_PatternOffsetX), Math.Abs(_PatternOffsetY)) < _InitParam.CheckOffset) {
-                Log.FuncI(string.Format($"Check Offset Result True Criteria:[{_InitParam.CheckOffset}] Max Offset:[{Math.Max(Math.Abs(_PatternOffsetX), Math.Abs(_PatternOffsetY))}"));
+                Log.I(string.Format($"Check Offset Result True Criteria:[{_InitParam.CheckOffset}] Max Offset:[{Math.Max(Math.Abs(_PatternOffsetX), Math.Abs(_PatternOffsetY))}"));
                 return SEQ_SET_VISION_POSITION;
-            } 
-            // Pattern Find nOK >> 설정 범위 넘어감
-            else if (_FindPatternCount < 10) {
+            } else if (_FindPatternCount < 10) {
                 _CheckOffsetCount++;
-                Log.FuncI(string.Format($"Find Pattern Count[{_FindPatternCount}]"));
+                Log.I(string.Format($"Check Offset Result True Criteria:[{_InitParam.CheckOffset}] Max Offset:[{Math.Max(Math.Abs(_PatternOffsetX), Math.Abs(_PatternOffsetY))}"));
                 return SEQ_FIND_PATTERN;
             } else {
                 Log.E(String.Format("ERROR_CHECK_OFFSET_COUNT_OVER"));

WeldingComponents/WeldingCommon/Sequences/Main/SeqUploadWeldingList.cs

@@ -409,7 +409,6 @@ namespace WeldingCommon.Sequences {
 
             //CSV Laser Log 추가
             laserLog.Date = DateTime.Now;
-            laserLog.WeldType = "Line";
             laserLog.WeldCondition = param.No + 1;
             laserLog.LaserOnDelay = param.LaserOnDelay;
             laserLog.LaserOffDelay = param.LaserOffDelay;
@@ -419,6 +418,7 @@ namespace WeldingCommon.Sequences {
             laserLog.Power = param.LaserPower1;
             laserLog.JumpSpeed = param.JumpSpeed;
             laserLog.MarkSpeed = param.MarkSpeed;
+            laserLog.WeldType = "Line";
 
             // 2. 스캐너 가공 작업
             // 2.1. Wobbel 관련 설정
@@ -701,7 +701,7 @@ namespace WeldingCommon.Sequences {
                 Log.I(string.Format($"[Line Weld] Mark(Ramping) ({obj.PF2.X},{obj.PF2.Y})"));
             } else {
                 // Ramping 이 없는 경우
-
+                
                 _Scanner.WriteDA((uint)eAnalogPortOut.DA1, percentLaser1, eFunctionType.LIST);
                 _Scanner.WriteDA((uint)eAnalogPortOut.DA2, percentLaser2, eFunctionType.LIST);
                 _Scanner.MarkAbs(obj.PF2.X + xOffset, obj.PF2.Y + yOffset);
@@ -724,9 +724,6 @@ namespace WeldingCommon.Sequences {
             laserLog.StartPointY = obj.PF1.Y;
             laserLog.EndPointX = obj.PF2.X;
             laserLog.EndPointY = obj.PF2.Y;
-            laserLog.LotID = Status.GetProcessingWeldingData().WorkLotId;
-            laserLog.CellID = Status.GetProcessingWeldingData().WorkCellId;
-            laserLog.HeadNo = Status.GetProcessingWeldingData().WeldingJigNo;
             Status.GetProcessingWeldingData().APD.Add(laserLog);
         }
 
@@ -1412,16 +1409,13 @@ namespace WeldingCommon.Sequences {
 
             // 1.스캐너 가공조건 설정
             ScannerParam param = ScannerCanvasUserCtrl.ScannerParams[obj.ScannerParamNo];
-            var laserLog = new ActualProcessUnit();
             float percentLaser1 = 0;
             float percentLaser2 = 0;
             SetScannerProcessCondition(param, out percentLaser1, out percentLaser2);
 
-            Log.I(string.Format($"[Arc Weld] Weld Condition(No:{param.No + 1}) Setting(LaserOnDelay:{param.LaserOnDelay},LaserOffDelay:{param.LaserOffDelay},JumpDelay:{param.JumpDelay},MarkDelay:{param.MarkDelay},PolygonDelay:{param.PolygonDelay},Power:{param.LaserPower1},JumpSpeed:{param.JumpSpeed},MarkSpeed:{param.MarkSpeed})"));
-
             //CSV Laser Log 추가
+            var laserLog = new ActualProcessUnit();
             laserLog.Date = DateTime.Now;
-            laserLog.WeldType = "Arc";
             laserLog.WeldCondition = param.No + 1;
             laserLog.LaserOnDelay = param.LaserOnDelay;
             laserLog.LaserOffDelay = param.LaserOffDelay;
@@ -1431,6 +1425,9 @@ namespace WeldingCommon.Sequences {
             laserLog.Power = param.LaserPower1;
             laserLog.JumpSpeed = param.JumpSpeed;
             laserLog.MarkSpeed = param.MarkSpeed;
+            laserLog.WeldType = "Arc";
+
+            Log.I(string.Format($"[Arc Weld] Weld Condition(No:{param.No + 1}) Setting(LaserOnDelay:{param.LaserOnDelay},LaserOffDelay:{param.LaserOffDelay},JumpDelay:{param.JumpDelay},MarkDelay:{param.MarkDelay},PolygonDelay:{param.PolygonDelay},Power:{param.LaserPower1},JumpSpeed:{param.JumpSpeed},MarkSpeed:{param.MarkSpeed})"));
 
             // 2. 스캐너 가공 작업
             // 2.1. Wobbel 관련 설정
@@ -1461,6 +1458,10 @@ namespace WeldingCommon.Sequences {
                     _Scanner.WriteDA((uint)eAnalogPortOut.DA2, 0, eFunctionType.LIST);
                     _Scanner.JumpAbs(obj.PF1.X + xOffset, obj.PF1.Y + yOffset, eFunctionType.LIST);
                     Log.I(string.Format($"[Arc Weld] Jump ({obj.PF1.X + xOffset},{obj.PF1.Y + yOffset})"));
+
+                    //CSV Laser Log 추가
+                    laserLog.JumpX = obj.PF1.X + xOffset;
+                    laserLog.JumpY = obj.PF1.Y + yOffset;
                 }
 
             } else {
@@ -1608,7 +1609,7 @@ namespace WeldingCommon.Sequences {
                 // 2.2.3.1. Constant Range 파워 설정
                 _Scanner.WriteDA((uint)eAnalogPortOut.DA1, percentLaser1, eFunctionType.LIST);
                 _Scanner.WriteDA((uint)eAnalogPortOut.DA2, percentLaser2, eFunctionType.LIST);
-
+                
                 // 2.2.3.2. Constant Range 구간 위치 변경
                 for (int iter = risingEdgeCount+firstEdgeCount; iter < totalCount - fallingEdgeCount; iter++) {
                     _Scanner.ArcAbs(obj.CenterPointF.X + xOffset, obj.CenterPointF.Y + yOffset, theta);
@@ -1655,22 +1656,19 @@ namespace WeldingCommon.Sequences {
 
             _LastX = obj.PF2.X + xOffset;
             _LastY = obj.PF2.Y + yOffset;
+            if (obj.MadebyRCC) {
+                Log.I(string.Format($"[RCC SubPath Arc Weld] Arc center ({obj.CenterPointF.X + xOffset},{obj.CenterPointF.Y + yOffset}), Sweep angle : ({obj.SweepAngle})"));
+            } else {
+                Log.I(string.Format($"[Arc Weld] Arc center ({obj.CenterPointF.X + xOffset},{obj.CenterPointF.Y + yOffset}), Sweep angle : ({obj.SweepAngle})"));
+            }
 
             //CSV Laser Log 추가
             laserLog.StartPointX = obj.PF1.X;
             laserLog.StartPointY = obj.PF1.Y;
             laserLog.EndPointX = obj.PF2.X;
             laserLog.EndPointY = obj.PF2.Y;
-            laserLog.LotID = Status.GetProcessingWeldingData().WorkLotId;
-            laserLog.CellID = Status.GetProcessingWeldingData().WorkCellId;
             Status.GetProcessingWeldingData().APD.Add(laserLog);
 
-            if (obj.MadebyRCC) {
-                Log.I(string.Format($"[RCC SubPath Arc Weld] Arc center ({obj.CenterPointF.X + xOffset},{obj.CenterPointF.Y + yOffset}), Sweep angle : ({obj.SweepAngle})"));
-            } else {
-                Log.I(string.Format($"[Arc Weld] Arc center ({obj.CenterPointF.X + xOffset},{obj.CenterPointF.Y + yOffset}), Sweep angle : ({obj.SweepAngle})"));
-            }
-
         }
 
         private void LoadArc3PScannerParam(Arc3Point obj)
@@ -1681,26 +1679,12 @@ namespace WeldingCommon.Sequences {
 
             // 1.스캐너 가공조건 설정
             ScannerParam param = ScannerCanvasUserCtrl.ScannerParams[obj.ScannerParamNo];
-            var laserLog = new ActualProcessUnit();
             float percentLaser1 = 0;
             float percentLaser2 = 0;
             SetScannerProcessCondition(param, out percentLaser1, out percentLaser2);
 
             Log.I(string.Format($"[Arc3P Weld] Weld Condition(No:{param.No + 1}) Setting(LaserOnDelay:{param.LaserOnDelay},LaserOffDelay:{param.LaserOffDelay},JumpDelay:{param.JumpDelay},MarkDelay:{param.MarkDelay},PolygonDelay:{param.PolygonDelay},Power:{param.LaserPower1},JumpSpeed:{param.JumpSpeed},MarkSpeed:{param.MarkSpeed})"));
 
-            //CSV Laser Log 추가
-            laserLog.Date = DateTime.Now;
-            laserLog.WeldType = "Arc3";
-            laserLog.WeldCondition = param.No + 1;
-            laserLog.LaserOnDelay = param.LaserOnDelay;
-            laserLog.LaserOffDelay = param.LaserOffDelay;
-            laserLog.JumpDelay = param.JumpDelay;
-            laserLog.MarkDelay = param.MarkDelay;
-            laserLog.PolygonDelay = param.PolygonDelay;
-            laserLog.Power = param.LaserPower1;
-            laserLog.JumpSpeed = param.JumpSpeed;
-            laserLog.MarkSpeed = param.MarkSpeed;
-
             // 2. 스캐너 가공 작업
             // 2.1. Wobbel 관련 설정
             // Snowman 사용 모드가 아닐 경우 Wobbel 모드 실행
@@ -1925,16 +1909,6 @@ namespace WeldingCommon.Sequences {
 
             _LastX = obj.PF2.X + xOffset;
             _LastY = obj.PF2.Y + yOffset;
-
-            //CSV Laser Log 추가
-            laserLog.StartPointX = obj.PF1.X;
-            laserLog.StartPointY = obj.PF1.Y;
-            laserLog.EndPointX = obj.PF2.X;
-            laserLog.EndPointY = obj.PF2.Y;
-            laserLog.LotID = Status.GetProcessingWeldingData().WorkLotId;
-            laserLog.CellID = Status.GetProcessingWeldingData().WorkCellId;
-            Status.GetProcessingWeldingData().APD.Add(laserLog);
-
             if (obj.MadebyRCC) {
                 Log.I(string.Format($"[RCC SubPath Arc3P Weld] Arc center ({obj.CenterPointF.X + xOffset},{obj.CenterPointF.Y + yOffset}), Sweep angle : ({obj.SweepAngle})"));
             } else {

WeldingComponents/WeldingCommon/Settings/SystemParameterManager.cs

@@ -52,14 +52,12 @@ namespace WeldingCommon.Settings
             var forRecipes = VisionRecipeManager.GetFovRecipes(forInfos);
             if (forRecipes == null)
                 return;
-
-#warning 여기서 이거 왜 새로 저장하는건지 확인 필요함
-            //foreach (var forRecipe in forRecipes) {
-            //    // PixelSize
-            //    forRecipe.CalFovRecipe.PixelSize.X = SysParam.CameraPixelSize;
-            //    forRecipe.CalFovRecipe.PixelSize.Y = SysParam.CameraPixelSize;
-            //}
-            //RecipeFileManager.SaveVisionRecipe();
+            foreach (var forRecipe in forRecipes) {
+                // PixelSize
+                forRecipe.CalFovRecipe.PixelSize.X = SysParam.CameraPixelSize;
+                forRecipe.CalFovRecipe.PixelSize.Y = SysParam.CameraPixelSize;
+            }
+            RecipeFileManager.SaveVisionRecipe();
         }
     }
 }

WeldingComponents/WeldingCommon/Utils/ChangeChecker.cs

@@ -1,45 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using System.Threading.Tasks;
-
-namespace WeldingCommon.Utils
-{
-    public class ChangeChecker
-    {
-        private static Dictionary<string, bool> mapping = new Dictionary<string, bool>();
-        public static bool IsChangedBool(string Resource, bool value, bool defaultVal = false)
-        {
-            if (mapping.ContainsKey(Resource) == false) {
-                mapping[Resource] = defaultVal;
-                return false;
-            }
-
-            if (mapping[Resource] == value) {
-                return false;
-            }
-
-            mapping[Resource] = value;
-            return true;
-        }
-        public static bool IsChangedBoolMonitoring(string Resource, bool value, bool MonitoringValue, bool defaultVal = false)
-        {
-            if (mapping.ContainsKey(Resource) == false) {
-                mapping[Resource] = defaultVal;
-                return false;
-            }
-
-            if (mapping[Resource] == value) {
-                return false;
-            }
-
-            mapping[Resource] = value;
-
-            if(mapping[Resource] == MonitoringValue)
-                return true;
-
-            return false;
-        }
-    }
-}

WeldingComponents/WeldingCommon/Views/Calibration/UCScannerCalibration.xaml

@@ -61,15 +61,6 @@
                         <DataGridTextColumn Header="Master Y" Binding="{Binding MasterY}"/>
                         <DataGridTextColumn Header="Vision X" Binding="{Binding VisionX}"/>
                         <DataGridTextColumn Header="Vision Y" Binding="{Binding VisionY}"/>
-                        <DataGridTemplateColumn Header="Get Center Count">
-                            <DataGridTemplateColumn.CellTemplate>
-                                <DataTemplate>
-                                    <Button Content="Click"
-                                            Command="{Binding DataContext.CMD_GetCenterCnt, RelativeSource={RelativeSource AncestorType=DataGrid}}"
-								            HorizontalAlignment="Stretch" VerticalAlignment="Stretch"/>
-                                </DataTemplate>
-                            </DataGridTemplateColumn.CellTemplate>
-                        </DataGridTemplateColumn>
                     </DataGrid.Columns>
                 </DataGrid>
             </GroupBox>

WeldingComponents/WeldingCommon/Views/Calibration/UCScannerCalibrationViewModel.cs

@@ -44,7 +44,6 @@ namespace WeldingCommon.Views
         public ICommand CMD_StopScannerCalibration { get; }
         public ICommand CMD_FindPattern { get; }
         public ICommand CMD_CalculateDistance { get; }
-        public ICommand CMD_GetCenterCnt { get; }
 
         //public ICommand CMD_ChangedCaltype { get; }
         //public ICommand CMD_SeqStop { get; }
@@ -183,7 +182,6 @@ namespace WeldingCommon.Views
             CMD_StopScannerCalibration = new DelegateCommand(PerformCmdStopScannerCalibration);
             CMD_FindPattern = new DelegateCommand(PerformCmdFindPattern);
             CMD_CalculateDistance = new DelegateCommand(PerformCmdCalculateDistance);
-            CMD_GetCenterCnt = new DelegateCommand(PerformCmdGetCenterCount);
 
             _MonitorTimer = new DispatcherTimer();
             _MonitorTimer.Tick += OnMonitoring;
@@ -193,7 +191,6 @@ namespace WeldingCommon.Views
             _Aurora.EventObservable.AsObservable(CommonSequenceIds.SeqScannerCalibration)
                 .ObserveOnDispatcher().Subscribe(x => OnUpdateCorrectionTable(x));
         }
-
         private void InitVariable()
         {
             GridRowCount = 13;
@@ -621,19 +618,6 @@ namespace WeldingCommon.Views
                 Log.W($"{e.Message}");
             }
         }
-
-        private void PerformCmdGetCenterCount(object obj)
-        {
-            _Scanner.GetXYPos(out double currentX, out double currentY);
-
-            // Vision Scanner Calibration인 경우
-            int visionBitX = (int)(currentX * _Scanner.Config.ScaleXYFactor);
-            int visionBitY = (int)(currentY * _Scanner.Config.ScaleXYFactor);
-
-            VisionCorrectionList[SelectedRowIndex].VisionX = visionBitX;
-            VisionCorrectionList[SelectedRowIndex].VisionY = visionBitY;
-        }
-
     }
     public class CorrectionUnit : NotifyPropertyChangedBase
     {
@@ -663,4 +647,5 @@ namespace WeldingCommon.Views
         private double _Distance;
         public double Distance { get => _Distance; set => SetProperty(ref _Distance, value); }
     }
+
 }

WeldingComponents/WeldingCommon/WeldingCommon.csproj

@@ -248,7 +248,6 @@
     <Compile Include="Settings\SystemParameter.cs" />
     <Compile Include="Settings\SystemParameterManager.cs" />
     <Compile Include="Status.cs" />
-    <Compile Include="Utils\ChangeChecker.cs" />
     <Compile Include="Utils\CSV_Manager.cs" />
     <Compile Include="Utils\ExcelManagementUnit.cs" />
     <Compile Include="Utils\ImageUtil.cs" />