diff --git a/Machines/ILSOS_ACW_H52A/Sequences/SeqAutoRunACWH52A.cs b/Machines/ILSOS_ACW_H52A/Sequences/SeqAutoRunACWH52A.cs
index ff40d09..eb18d22 100644
--- a/Machines/ILSOS_ACW_H52A/Sequences/SeqAutoRunACWH52A.cs
+++ b/Machines/ILSOS_ACW_H52A/Sequences/SeqAutoRunACWH52A.cs
@@ -205,8 +205,8 @@ namespace ILSOS_ACW_H52A.Sequences
                     > sb[SEQ_SET_PARAMS_UPLOAD_WELDING_LIST_SEQ] > sb[SEQ_DO_ID_UPLOAD_WELDING_LIST_SEQ] > sb[SEQ_GET_RESULT_UPLOAD_WELDING_LIST_SEQ]
                     > sb[SEQ_EXECUTE_WELDING] > sb[SEQ_REQUEST_UNLOAD_CELL] > sb[SEQ_CHECK_CAN_WELDED]
                     > sb[SEQ_SET_PARAMS_REPORT_CELL_RESULT_SEQ] > sb[SEQ_DO_ID_REPORT_CELL_RESULT_SEQ] > sb[SEQ_GET_RESULT_REPORT_CELL_RESULT_SEQ]
-                    > sb[SEQ_CHECK_CYCLE_STOP]
-                    > sb[SEQ_SAVE_RESULT_DATA] > sb[SEQ_WRITE_COMPLETION_PLC_BIT] > sb[SEQ_JOIN_ENCODER_MONITOR] > sb[SEQ_COMPLETE]);
+                    > sb[SEQ_SAVE_RESULT_DATA] > sb[SEQ_CHECK_CYCLE_STOP]
+                    > sb[SEQ_WRITE_COMPLETION_PLC_BIT] > sb[SEQ_JOIN_ENCODER_MONITOR] > sb[SEQ_COMPLETE]);
 
             sb.Flows(sb[SEQ_READY_SCANNER_LIST] > sb[SEQ_EXECUTE_WELDING]);
 
@@ -570,6 +570,8 @@ namespace ILSOS_ACW_H52A.Sequences
                 return SEQ_INIT_CONDITION_ERROR;
             }
 
+            Status.EquipmentMode = eEquipmentMode.AUTO;
+
             var startTime = DateTime.Now;
             context.PutValue(ContextKey.KEY_SEQUENCE_START_TIME, startTime);
             Thread.Sleep(1); // 부하 방지
@@ -838,33 +840,40 @@ namespace ILSOS_ACW_H52A.Sequences
                 SetInputScannerList(_WeldingScannerListNo, DateTime.Now, _WeldingCount, _WeldingStartAngle, _WeldingJigNo, _RotaryJigCount, canExist, LotId, CellId);
                 _RecipeNo = _RecipeManager.ActivatedRecipe().Id;
 
-                var item = _SelectedDrawObjectList[0];
-
-                if (item is Line)
-                {
-                    Line lineItem = (Line)item;
-                    ScannerParam laserParam = WeldingRecipeManager.GetScannerParam(lineItem.ScannerParamNo);
-
-                    // EDC 보내는 용도
-                    Status.GetProcessingWeldingData().LaserPowerCore = laserParam.LaserPower1.ToString();
-                    Status.GetProcessingWeldingData().MarkSpeed = laserParam.MarkSpeed.ToString();
-                    Status.GetProcessingWeldingData().FocalLength = (_PLC.ReadDWord((int)eWordInput.PLC_WELDING_FOCAL_LENGTH).data / 1000f).ToString();
-                    Status.GetProcessingWeldingData().WeldingJigNo = _WeldingJigNo.ToString();
-                }
-
+                SetWeldingData();
             }
             else
             {
                 return SEQ_EXECUTE_WELDING;
             }
-
-            //var item = _SelectedDrawObjectList[0];
-
-
-            // 여기서 어디로 가는지 설정 필요함
             return SEQ_SET_PARAMS_UPLOAD_WELDING_LIST_SEQ;
             #endregion
+        }
 
+        private ScannerParam GetSelectedDrawObjectData(IDrawObject DrawObj)
+        {
+            if (DrawObj is Line lineItem)
+                return WeldingRecipeManager.GetScannerParam(lineItem.ScannerParamNo);
+            else if (DrawObj is Arc arcItem)
+                return WeldingRecipeManager.GetScannerParam(arcItem.ScannerParamNo);
+            else if (DrawObj is Group groupItem)
+                return WeldingRecipeManager.GetScannerParam(groupItem.ScannerParamNo);
+
+            return null;
+        }
+        private void SetWeldingData()
+        {
+            ScannerParam laserParam = null;
+            laserParam = GetSelectedDrawObjectData(_SelectedDrawObjectList[0]);
+
+            if (laserParam != null)
+            {
+                // EDC 보내는 용도
+                Status.GetProcessingWeldingData().LaserPowerCore = laserParam.LaserPower1.ToString();
+                Status.GetProcessingWeldingData().MarkSpeed = laserParam.MarkSpeed.ToString();
+                Status.GetProcessingWeldingData().FocalLength = (_PLC.ReadDWord((int)eWordInput.PLC_WELDING_FOCAL_LENGTH).data / 1000f).ToString();
+                Status.GetProcessingWeldingData().WeldingJigNo = _WeldingJigNo.ToString();
+            }
         }
 
         public void WaitForEncoderNextRotarySection(int weldingCount, int rotaryJigCount, double rotaryAngleOffset, double encoderResetOffset, out double sectionStartAngle)
@@ -1181,10 +1190,13 @@ namespace ILSOS_ACW_H52A.Sequences
 
         private SequenceActionResult SaveResultData(SequenceContext context, string id, SequenceActionResult param)
         {
-            string directoryPath = "D:\\ILSOSConfig\\APD_History";
-            string fileName = Status.GetProcessingWeldingData().APD.First().Date.ToString("HHmmss") + "_" + Status.GetProcessingWeldingData().APD.First().CellID;
-            string fullPath = Path.Combine(directoryPath, Status.GetProcessingWeldingData().APD.First().Date.ToString("yyyy-MM-dd"), fileName);
-            Status.GetProcessingWeldingData().APD.CreateFiles(fullPath);
+            if (Status.GetProcessingWeldingData().APD.Count > 0)
+            {
+                string directoryPath = "D:\\ILSOSConfig\\APD_History";
+                string fileName = Status.GetProcessingWeldingData().APD.First().Date.ToString("HHmmss") + "_" + Status.GetProcessingWeldingData().APD.First().CellID;
+                string fullPath = Path.Combine(directoryPath, Status.GetProcessingWeldingData().APD.First().Date.ToString("yyyy-MM-dd"), fileName);
+                Status.GetProcessingWeldingData().APD.CreateFiles(fullPath);
+            }
 
             context.PutValue(ContextKey.KEY_SEQUENCE_RESULT, true);
             return SequenceAction.Ok();
@@ -1309,6 +1321,8 @@ namespace ILSOS_ACW_H52A.Sequences
 
         private void OnSeqActionStop()
         {
+            Status.EquipmentMode = eEquipmentMode.MANUAL;
+
             //PLC All BIT OFF
             for (int i = 0; i < _RotaryJigCount; i++)
             {
diff --git a/Machines/ILSOS_CCW_H52A/Sequences/SeqAutoRunCCWH52A.cs b/Machines/ILSOS_CCW_H52A/Sequences/SeqAutoRunCCWH52A.cs
index deb5483..d9db7da 100644
--- a/Machines/ILSOS_CCW_H52A/Sequences/SeqAutoRunCCWH52A.cs
+++ b/Machines/ILSOS_CCW_H52A/Sequences/SeqAutoRunCCWH52A.cs
@@ -207,8 +207,8 @@ namespace ILSOS_CCW_H52A.Sequences
                     > sb[SEQ_SET_PARAMS_UPLOAD_WELDING_LIST_SEQ] > sb[SEQ_DO_ID_UPLOAD_WELDING_LIST_SEQ] > sb[SEQ_GET_RESULT_UPLOAD_WELDING_LIST_SEQ]
                     > sb[SEQ_EXECUTE_WELDING] > sb[SEQ_REQUEST_UNLOAD_CELL] > sb[SEQ_CHECK_CAN_WELDED]
                     > sb[SEQ_SET_PARAMS_REPORT_CELL_RESULT_SEQ] > sb[SEQ_DO_ID_REPORT_CELL_RESULT_SEQ] > sb[SEQ_GET_RESULT_REPORT_CELL_RESULT_SEQ]
-                    > sb[SEQ_CHECK_CYCLE_STOP]
-                    > sb[SEQ_SAVE_RESULT_DATA] > sb[SEQ_WRITE_COMPLETION_PLC_BIT] > sb[SEQ_JOIN_ENCODER_MONITOR] > sb[SEQ_COMPLETE]);
+                    > sb[SEQ_SAVE_RESULT_DATA] > sb[SEQ_CHECK_CYCLE_STOP]
+                    > sb[SEQ_WRITE_COMPLETION_PLC_BIT] > sb[SEQ_JOIN_ENCODER_MONITOR] > sb[SEQ_COMPLETE]);
 
             sb.Flows(sb[SEQ_READY_SCANNER_LIST] > sb[SEQ_EXECUTE_WELDING]);
 
@@ -838,33 +838,40 @@ namespace ILSOS_CCW_H52A.Sequences
                 SetInputScannerList(_WeldingScannerListNo, DateTime.Now, _WeldingCount, _WeldingStartAngle, _WeldingJigNo, _RotaryJigCount, canExist, LotId, CellId);
                 _RecipeNo = _RecipeManager.ActivatedRecipe().Id;
 
-                var item = _SelectedDrawObjectList[0];
-
-                if (item is Line)
-                {
-                    Line lineItem = (Line)item;
-                    ScannerParam laserParam = WeldingRecipeManager.GetScannerParam(lineItem.ScannerParamNo);
-
-                    // EDC 보내는 용도
-                    Status.GetProcessingWeldingData().LaserPowerCore = laserParam.LaserPower1.ToString();
-                    Status.GetProcessingWeldingData().MarkSpeed = laserParam.MarkSpeed.ToString();
-                    Status.GetProcessingWeldingData().FocalLength = (_PLC.ReadDWord((int)eWordInput.PLC_WELDING_FOCAL_LENGTH).data / 1000f).ToString();
-                    Status.GetProcessingWeldingData().WeldingJigNo = _WeldingJigNo.ToString();
-                }
-
+                SetWeldingData();
             }
             else
             {
                 return SEQ_EXECUTE_WELDING;
             }
-
-            //var item = _SelectedDrawObjectList[0];
-
-
-            // 여기서 어디로 가는지 설정 필요함
             return SEQ_SET_PARAMS_UPLOAD_WELDING_LIST_SEQ;
             #endregion
+        }
 
+        private ScannerParam GetSelectedDrawObjectData(IDrawObject DrawObj)
+        {
+            if (DrawObj is Line lineItem)
+                return WeldingRecipeManager.GetScannerParam(lineItem.ScannerParamNo);
+            else if (DrawObj is Arc arcItem)
+                return WeldingRecipeManager.GetScannerParam(arcItem.ScannerParamNo);
+            else if (DrawObj is Group groupItem)
+                return WeldingRecipeManager.GetScannerParam(groupItem.ScannerParamNo);
+
+            return null;
+        }
+        private void SetWeldingData()
+        {
+            ScannerParam laserParam = null;
+            laserParam = GetSelectedDrawObjectData(_SelectedDrawObjectList[0]);
+
+            if (laserParam != null)
+            {
+                // EDC 보내는 용도
+                Status.GetProcessingWeldingData().LaserPowerCore = laserParam.LaserPower1.ToString();
+                Status.GetProcessingWeldingData().MarkSpeed = laserParam.MarkSpeed.ToString();
+                Status.GetProcessingWeldingData().FocalLength = (_PLC.ReadDWord((int)eWordInput.PLC_WELDING_FOCAL_LENGTH).data / 1000f).ToString();
+                Status.GetProcessingWeldingData().WeldingJigNo = _WeldingJigNo.ToString();
+            }
         }
 
         public void WaitForEncoderNextRotarySection(int weldingCount, int rotaryJigCount, double rotaryAngleOffset, double encoderResetOffset, out double sectionStartAngle)
@@ -1181,6 +1188,14 @@ namespace ILSOS_CCW_H52A.Sequences
         }
         private SequenceActionResult SaveResultData(SequenceContext context, string id, SequenceActionResult param)
         {
+            if (Status.GetProcessingWeldingData().APD.Count > 0)
+            {
+                string directoryPath = "D:\\ILSOSConfig\\APD_History";
+                string fileName = Status.GetProcessingWeldingData().APD.First().Date.ToString("HHmmss") + "_" + Status.GetProcessingWeldingData().APD.First().CellID;
+                string fullPath = Path.Combine(directoryPath, Status.GetProcessingWeldingData().APD.First().Date.ToString("yyyy-MM-dd"), fileName);
+                Status.GetProcessingWeldingData().APD.CreateFiles(fullPath);
+            }
+
             context.PutValue(ContextKey.KEY_SEQUENCE_RESULT, true);
             return SequenceAction.Ok();
         }
diff --git a/WeldingComponents/WeldingCommon/Data/ActualProcessData.cs b/WeldingComponents/WeldingCommon/Data/ActualProcessData.cs
index 2b3c89f..151cfef 100644
--- a/WeldingComponents/WeldingCommon/Data/ActualProcessData.cs
+++ b/WeldingComponents/WeldingCommon/Data/ActualProcessData.cs
@@ -28,6 +28,7 @@ namespace WeldingCommon.Data
             table.Columns.Add("Time", typeof(string));
             table.Columns.Add(nameof(ActualProcessUnit.LotID), typeof(string));
             table.Columns.Add(nameof(ActualProcessUnit.CellID), typeof(string));
+            table.Columns.Add(nameof(ActualProcessUnit.WeldType), typeof(string));
             table.Columns.Add(nameof(ActualProcessUnit.EncoderCheck), typeof(bool));
             table.Columns.Add(nameof(ActualProcessUnit.StartPointX), typeof(double));
             table.Columns.Add(nameof(ActualProcessUnit.StartPointY), typeof(double));
@@ -60,7 +61,7 @@ namespace WeldingCommon.Data
         protected override void InsertItem(int index, ActualProcessUnit item)
         {
             base.InsertItem(index, item);
-            table.Rows.Add(item.Date.ToString("yyyy-MM-dd"), item.Date.ToString("HH:mm:ss.fff"), item.LotID, item.CellID, item.EncoderCheck, 
+            table.Rows.Add(item.Date.ToString("yyyy-MM-dd"), item.Date.ToString("HH:mm:ss.fff"), item.LotID, item.CellID, item.WeldType, item.EncoderCheck, 
                            item.StartPointX, item.StartPointY, item.EndPointX, item.EndPointY, 
                            item.WeldCondition, item.LaserOnDelay, item.LaserOffDelay, item.JumpDelay, item.MarkDelay, 
                            item.PolygonDelay, item.Power, item.JumpSpeed, item.MarkSpeed, item.JumpX, 
@@ -80,6 +81,8 @@ namespace WeldingCommon.Data
         private DateTime _Date;
         public string LotID { get => Status.GetProcessingWeldingData().LotId; }
         public string CellID { get => Status.GetProcessingWeldingData().CellId; }
+        public string WeldType { get => _WeldType; set => SetProperty(ref _WeldType, value); }
+        private string _WeldType;
         public bool EncoderCheck { get => _EncoderCheck; set => SetProperty(ref _EncoderCheck, value); }
         private bool _EncoderCheck;
         public double StartPointX { get => _StartPointX; set => SetProperty(ref _StartPointX, value); }
diff --git a/WeldingComponents/WeldingCommon/Sequences/Main/SeqUploadWeldingList.cs b/WeldingComponents/WeldingCommon/Sequences/Main/SeqUploadWeldingList.cs
index 71909c2..fca9fe2 100644
--- a/WeldingComponents/WeldingCommon/Sequences/Main/SeqUploadWeldingList.cs
+++ b/WeldingComponents/WeldingCommon/Sequences/Main/SeqUploadWeldingList.cs
@@ -409,6 +409,7 @@ namespace WeldingCommon.Sequences {
 
             //CSV Laser Log 추가
             laserLog.Date = DateTime.Now;
+            laserLog.WeldType = "Line";
             laserLog.WeldCondition = param.No + 1;
             laserLog.LaserOnDelay = param.LaserOnDelay;
             laserLog.LaserOffDelay = param.LaserOffDelay;
@@ -1408,12 +1409,26 @@ namespace WeldingCommon.Sequences {
 
             // 1.스캐너 가공조건 설정
             ScannerParam param = ScannerCanvasUserCtrl.ScannerParams[obj.ScannerParamNo];
+            var laserLog = new ActualProcessUnit();
             float percentLaser1 = 0;
             float percentLaser2 = 0;
             SetScannerProcessCondition(param, out percentLaser1, out percentLaser2);
 
             Log.I(string.Format($"[Arc Weld] Weld Condition(No:{param.No + 1}) Setting(LaserOnDelay:{param.LaserOnDelay},LaserOffDelay:{param.LaserOffDelay},JumpDelay:{param.JumpDelay},MarkDelay:{param.MarkDelay},PolygonDelay:{param.PolygonDelay},Power:{param.LaserPower1},JumpSpeed:{param.JumpSpeed},MarkSpeed:{param.MarkSpeed})"));
 
+            //CSV Laser Log 추가
+            laserLog.Date = DateTime.Now;
+            laserLog.WeldType = "Arc";
+            laserLog.WeldCondition = param.No + 1;
+            laserLog.LaserOnDelay = param.LaserOnDelay;
+            laserLog.LaserOffDelay = param.LaserOffDelay;
+            laserLog.JumpDelay = param.JumpDelay;
+            laserLog.MarkDelay = param.MarkDelay;
+            laserLog.PolygonDelay = param.PolygonDelay;
+            laserLog.Power = param.LaserPower1;
+            laserLog.JumpSpeed = param.JumpSpeed;
+            laserLog.MarkSpeed = param.MarkSpeed;
+
             // 2. 스캐너 가공 작업
             // 2.1. Wobbel 관련 설정
             // Snowman 사용 모드가 아닐 경우 Wobbel 모드 실행
@@ -1637,6 +1652,14 @@ namespace WeldingCommon.Sequences {
 
             _LastX = obj.PF2.X + xOffset;
             _LastY = obj.PF2.Y + yOffset;
+
+            //CSV Laser Log 추가
+            laserLog.StartPointX = obj.PF1.X;
+            laserLog.StartPointY = obj.PF1.Y;
+            laserLog.EndPointX = obj.PF2.X;
+            laserLog.EndPointY = obj.PF2.Y;
+            Status.GetProcessingWeldingData().APD.Add(laserLog);
+
             if (obj.MadebyRCC) {
                 Log.I(string.Format($"[RCC SubPath Arc Weld] Arc center ({obj.CenterPointF.X + xOffset},{obj.CenterPointF.Y + yOffset}), Sweep angle : ({obj.SweepAngle})"));
             } else {
@@ -1653,11 +1676,25 @@ namespace WeldingCommon.Sequences {
 
             // 1.스캐너 가공조건 설정
             ScannerParam param = ScannerCanvasUserCtrl.ScannerParams[obj.ScannerParamNo];
+            var laserLog = new ActualProcessUnit();
             float percentLaser1 = 0;
             float percentLaser2 = 0;
             SetScannerProcessCondition(param, out percentLaser1, out percentLaser2);
 
             Log.I(string.Format($"[Arc3P Weld] Weld Condition(No:{param.No + 1}) Setting(LaserOnDelay:{param.LaserOnDelay},LaserOffDelay:{param.LaserOffDelay},JumpDelay:{param.JumpDelay},MarkDelay:{param.MarkDelay},PolygonDelay:{param.PolygonDelay},Power:{param.LaserPower1},JumpSpeed:{param.JumpSpeed},MarkSpeed:{param.MarkSpeed})"));
+          
+            //CSV Laser Log 추가
+            laserLog.Date = DateTime.Now;
+            laserLog.WeldType = "Arc3";
+            laserLog.WeldCondition = param.No + 1;
+            laserLog.LaserOnDelay = param.LaserOnDelay;
+            laserLog.LaserOffDelay = param.LaserOffDelay;
+            laserLog.JumpDelay = param.JumpDelay;
+            laserLog.MarkDelay = param.MarkDelay;
+            laserLog.PolygonDelay = param.PolygonDelay;
+            laserLog.Power = param.LaserPower1;
+            laserLog.JumpSpeed = param.JumpSpeed;
+            laserLog.MarkSpeed = param.MarkSpeed;
 
             // 2. 스캐너 가공 작업
             // 2.1. Wobbel 관련 설정
@@ -1883,6 +1920,14 @@ namespace WeldingCommon.Sequences {
 
             _LastX = obj.PF2.X + xOffset;
             _LastY = obj.PF2.Y + yOffset;
+
+            //CSV Laser Log 추가
+            laserLog.StartPointX = obj.PF1.X;
+            laserLog.StartPointY = obj.PF1.Y;
+            laserLog.EndPointX = obj.PF2.X;
+            laserLog.EndPointY = obj.PF2.Y;
+            Status.GetProcessingWeldingData().APD.Add(laserLog);
+
             if (obj.MadebyRCC) {
                 Log.I(string.Format($"[RCC SubPath Arc3P Weld] Arc center ({obj.CenterPointF.X + xOffset},{obj.CenterPointF.Y + yOffset}), Sweep angle : ({obj.SweepAngle})"));
             } else {