Merge branch 'AddSlot' of https://gitea.ubisampaju.synology.me/RobotAutomationDevelopment-Dept/LGES-2170-ACW_CCW-Welder into AddSlot

External/Aurora/bin/hislogger.config

@@ -5,7 +5,7 @@
    "collector_mode": "MANUAL",
    "console_out": false,
    "file_out": true,
-   "log_save_dir": "_log",
+   "log_save_dir": "D:\\ILSOSConfig\\_log",
    "log_save_level": 0,
    "log_file_prefix": "Aurora",
    "log_file_size": 5,
@@ -20,7 +20,7 @@
    "collector_mode": "MANUAL",
    "console_out": false,
    "file_out": true,
-   "log_save_dir": "_process",
+   "log_save_dir": "D:\\ILSOSConfig\\_process",
    "log_save_level": 0,
    "log_file_prefix": "process",
    "log_file_size": 5,
@@ -35,7 +35,7 @@
    "collector_mode": "MANUAL",
    "console_out": false,
    "file_out": true,
-   "log_save_dir": "_vision",
+   "log_save_dir": "D:\\ILSOSConfig\\_vision",
    "log_save_level": 0,
    "log_file_prefix": "vision",
    "log_file_size": 5,

Machines/ILSOS_ACW_H52A/Recipes/RecipeEventHelper.cs

@@ -87,10 +87,10 @@ namespace ILSOS_ACW_H52A.Recipes {
             plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_A_POWER_2, (int)(_LineParam_1.RampingStartAPower2 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_A_POWER_2.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_A_DISTANCE, (int)(_LineParam_1.RampingStartADist * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_A_DISTANCE.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_B_POWER_1, (int)(_LineParam_1.RampingStartPower1 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_B_POWER_1.ToString())));
-            plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_B_POWER_2, (int)(_LineParam_1.RampingStartPower3 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_B_POWER_2.ToString())));
+            plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_B_POWER_2, (int)(_LineParam_1.RampingStartPower2 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_B_POWER_2.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_B_DISTANCE, (int)(_LineParam_1.RampingStartDist * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_START_B_DISTANCE.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_END_POWER_1, (int)(_LineParam_1.RampingEndPower1 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_END_POWER_1.ToString())));
-            plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_END_POWER_2, (int)(_LineParam_1.RampingEndPower3 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_END_POWER_2.ToString())));
+            plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_END_POWER_2, (int)(_LineParam_1.RampingEndPower2 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_END_POWER_2.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_1_WELDING_RAMPING_END_DISTANCE, (int)(_LineParam_1.RampingEndDist * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_1_WELDING_RAMPING_END_DISTANCE.ToString())));
             #endregion
             #region PLC Upload Parameter 2
@@ -104,10 +104,10 @@ namespace ILSOS_ACW_H52A.Recipes {
             plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_A_POWER_2, (int)(_LineParam_2.RampingStartAPower2 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_A_POWER_2.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_A_DISTANCE, (int)(_LineParam_2.RampingStartADist * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_A_DISTANCE.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_B_POWER_1, (int)(_LineParam_2.RampingStartPower1 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_B_POWER_1.ToString())));
-            plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_B_POWER_2, (int)(_LineParam_2.RampingStartPower3 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_B_POWER_2.ToString())));
+            plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_B_POWER_2, (int)(_LineParam_2.RampingStartPower2 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_B_POWER_2.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_B_DISTANCE, (int)(_LineParam_2.RampingStartDist * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_START_B_DISTANCE.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_END_POWER_1, (int)(_LineParam_2.RampingEndPower1 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_END_POWER_1.ToString())));
-            plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_END_POWER_2, (int)(_LineParam_2.RampingEndPower3 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_END_POWER_2.ToString())));
+            plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_END_POWER_2, (int)(_LineParam_2.RampingEndPower2 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_END_POWER_2.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_2_WELDING_RAMPING_END_DISTANCE, (int)(_LineParam_2.RampingEndDist * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_2_WELDING_RAMPING_END_DISTANCE.ToString())));
             #endregion
             #region PLC Upload Parameter 3
@@ -121,10 +121,10 @@ namespace ILSOS_ACW_H52A.Recipes {
             plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_A_POWER_2, (int)(_LineParam_3.RampingStartAPower2 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_A_POWER_2.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_A_DISTANCE, (int)(_LineParam_3.RampingStartADist * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_A_DISTANCE.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_B_POWER_1, (int)(_LineParam_3.RampingStartPower1 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_B_POWER_1.ToString())));
-            plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_B_POWER_2, (int)(_LineParam_3.RampingStartPower3 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_B_POWER_2.ToString())));
+            plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_B_POWER_2, (int)(_LineParam_3.RampingStartPower2 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_B_POWER_2.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_B_DISTANCE, (int)(_LineParam_3.RampingStartDist * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_START_B_DISTANCE.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_END_POWER_1, (int)(_LineParam_3.RampingEndPower1 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_END_POWER_1.ToString())));
-            plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_END_POWER_2, (int)(_LineParam_3.RampingEndPower3 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_END_POWER_2.ToString())));
+            plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_END_POWER_2, (int)(_LineParam_3.RampingEndPower2 * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_END_POWER_2.ToString())));
             plc.WriteDWord((int)eWordOutput.PC_PARAM_3_WELDING_RAMPING_END_DISTANCE, (int)(_LineParam_3.RampingEndDist * (plc as PLCControllerACWH52A).ConvertTo2WordDivisionIndex(eWordOutput.PC_PARAM_3_WELDING_RAMPING_END_DISTANCE.ToString())));
             #endregion
 
@@ -199,10 +199,10 @@ namespace ILSOS_ACW_H52A.Recipes {
             _LineParam_1.RampingStartAPower2 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_START_A_POWER_2);
             _LineParam_1.RampingStartADist = (double)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_START_A_DISTANCE);
             _LineParam_1.RampingStartPower1 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_START_B_POWER_1);
-            _LineParam_1.RampingStartPower3 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_START_B_POWER_2);
+            _LineParam_1.RampingStartPower2 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_START_B_POWER_2);
             _LineParam_1.RampingStartDist = (double)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_START_B_DISTANCE);
             _LineParam_1.RampingEndPower1 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_END_POWER_1);
-            _LineParam_1.RampingEndPower3 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_END_POWER_2);
+            _LineParam_1.RampingEndPower2 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_END_POWER_2);
             _LineParam_1.RampingEndDist = (double)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_1_WELDING_RAMPING_END_DISTANCE);
             #endregion
             #region Scanner Upload Parameter 2
@@ -216,10 +216,10 @@ namespace ILSOS_ACW_H52A.Recipes {
             _LineParam_2.RampingStartAPower2 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_START_A_POWER_2);
             _LineParam_2.RampingStartADist = (double)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_START_A_DISTANCE);
             _LineParam_2.RampingStartPower1 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_START_B_POWER_1);
-            _LineParam_2.RampingStartPower3 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_START_B_POWER_2);
+            _LineParam_2.RampingStartPower2 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_START_B_POWER_2);
             _LineParam_2.RampingStartDist = (double)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_START_B_DISTANCE);
             _LineParam_2.RampingEndPower1 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_END_POWER_1);
-            _LineParam_2.RampingEndPower3 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_END_POWER_2);
+            _LineParam_2.RampingEndPower2 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_END_POWER_2);
             _LineParam_2.RampingEndDist = (double)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_2_WELDING_RAMPING_END_DISTANCE);
             #endregion
             #region Scanner Upload Parameter 3
@@ -233,10 +233,10 @@ namespace ILSOS_ACW_H52A.Recipes {
             _LineParam_3.RampingStartAPower2 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_START_A_POWER_2);
             _LineParam_3.RampingStartADist = (double)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_START_A_DISTANCE);
             _LineParam_3.RampingStartPower1 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_START_B_POWER_1);
-            _LineParam_3.RampingStartPower3 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_START_B_POWER_2);
+            _LineParam_3.RampingStartPower2 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_START_B_POWER_2);
             _LineParam_3.RampingStartDist = (double)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_START_B_DISTANCE);
             _LineParam_3.RampingEndPower1 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_END_POWER_1);
-            _LineParam_3.RampingEndPower3 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_END_POWER_2);
+            _LineParam_3.RampingEndPower2 = (uint)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_END_POWER_2);
             _LineParam_3.RampingEndDist = (double)(plc as PLCControllerACWH52A).ReadDWordByDivision(eWordInput.PLC_PARAM_3_WELDING_RAMPING_END_DISTANCE);
             #endregion
 

Machines/ILSOS_CCW_H52A/EquipmentSetup.cs

@@ -23,12 +23,16 @@ using CoreUnit.Scanner.UserControl.ScannerCanvas;
 using DB;
 using DB.Recipe;
 using GUI;
+using Hermes;
 using ILSOS_CCW_H52A.Alarm;
 using ILSOS_CCW_H52A.Device;
 using ILSOS_CCW_H52A.Models;
 using ILSOS_CCW_H52A.Recipes;
 using ILSOS_CCW_H52A.Sequences;
 using ILSOS_CCW_H52A.Views;
+using System;
+using System.Reactive.Linq;
+using System.Windows;
 using System.Windows.Controls;
 using System.Windows.Media;
 using WeldingCommon;
@@ -40,12 +44,10 @@ using WeldingCommon.Views;
 using WeldingCommon.Vision.Factory;
 using static WeldingCommon.Vision.Factory.VisionFactory;
 
-namespace ILSOS_CCW_H52A
+namespace ILSOS_CCW_H52A {
-{
+    internal class EquipmentSetup : CommonEquipmentSetup, IEquipmentSetup {
-    internal class EquipmentSetup : CommonEquipmentSetup, IEquipmentSetup
-    {
         private SequenceBuilder _SeqAutoRunCCWH52A_Builder;
-
+        public Logger Log = new Logger("EquipmentSetup");
         public override void BuildMainStatusView(MainStatusBuilder builder)
         {
             base.BuildMainStatusView(builder);
@@ -57,7 +59,8 @@ namespace ILSOS_CCW_H52A
 
         public override string GetEquipmentName()
         {
-            return "ILSOS CCWH52A";
+            var equipSetting = AuroraEnv.SettingEntry[AuroraSettings.Equipment] as EquipmentInfo;
+            return equipSetting is null ? "ILSOS CCWH52A" : equipSetting.EquipmentName;
         }
 
         public void OnSetAlarm(int code, bool isHeavy)
@@ -78,6 +81,61 @@ namespace ILSOS_CCW_H52A
             AuroraEnv.SequenceEntry[SequenceIds.AlarmMonitoring].Start();
 
             AuroraEnv.GetProcessManager().Init(AuroraEnv);
+
+            // 최초에 permission에 대한 값을 적용해줌
+            OnPermissionChanged(null);
+            AuroraEnv.EventObservable.AsObservable(AuroraSysEvent.SYS_PERMISSION_CHANGED)
+                  .Subscribe(OnPermissionChanged);
+
+            var seq = AuroraEnv.SequenceEntry[SequenceIds.SeqAutoRunCCWH52A] as ISequence;
+            seq.RunStateChanged += AutoRunSeq_RunStateChanged;
+        }
+
+        private void AutoRunSeq_RunStateChanged(object sender, (string sequenceId, SequenceRunState state) e)
+        {
+            //AutoRun 상황에서 Recipe Save Lock
+            AuroraEnv.RecipeManager.SaveLock(CommonRecipeIds.ScannerObjectTeaching, e.state != SequenceRunState.Idle);
+            bool AutoRunState = e.state == SequenceRunState.Running;
+            Application.Current.Dispatcher.Invoke(() => {
+                if (AutoRunState)
+                    WeldingRecipeManager.OnActiveReloaded();
+                else
+                    WeldingRecipeManager.ReloadWeldingRecipe(WeldingRecipeManager.SelectedRecipe.name);
+
+                _UCRecipe.IsEnabled = e.state != SequenceRunState.Running;
+
+            });
+
+            Application.Current.Dispatcher.Invoke(() => {
+                if (AutoRunState)
+                    Log.E($"AutoRun Start. Recipe Lock Enable True");
+                else
+                    Log.E("AutoRun End. Recipe Lock Enable False");
+            });
+        }
+        private void OnPermissionChanged(EventMessage message)
+        {
+            bool permissionOn = ApplicationExt.PermissionLevel <= (ushort)PermissionLevel.LEVEL3;
+            AuroraEnv.RecipeManager.SaveLock(CommonRecipeIds.ScannerObjectTeaching, !permissionOn);
+
+            // Login 권한이 없어지면 Active된 레시피로 변경하도록 함
+            Application.Current.Dispatcher.Invoke(() => {
+                if (!permissionOn)
+                    WeldingRecipeManager.OnActiveReloaded();
+                else
+                    WeldingRecipeManager.ReloadWeldingRecipe(WeldingRecipeManager.SelectedRecipe.name);
+            });
+
+            //LogOut 상황에서 Recipe Save Lock
+            //LogOut 상황에서 Reicpe 화면 수정할 수 없도록 함
+            Application.Current.Dispatcher.Invoke(() => { _UCRecipe.IsEnabled = permissionOn; });
+            Application.Current.Dispatcher.Invoke(() => {
+                if (!permissionOn)
+                    Log.E($"User LogOut. Recipe Lock Enable True");
+                else
+                    Log.E("User Login. Recipe Lock Enable False");
+            });
+
         }
 
         // For Selection LaserDevice

Machines/ILSOS_CCW_H52A/Properties/AssemblyInfo.cs

@@ -45,9 +45,9 @@ using System.Windows;
 //      Minor Version
 //      Build Number
 //      Revision
-//
+//ㄴ
 // You can specify all the values or you can default the Build and Revision Numbers
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.1")]
+[assembly: AssemblyVersion("1.0.0.2")]
-[assembly: AssemblyFileVersion("1.0.0.1")]
+[assembly: AssemblyFileVersion("1.0.0.2")]

Machines/ILSOS_CCW_H52A/Views/Main/UCMainAutoRunViewModel.cs

@@ -78,7 +78,6 @@ namespace ILSOS_CCW_H52A.Views
             _Plc = _Aurora.DeviceManager[CommonDeviceIds.PLCDevice] as PLCControllerCCWH52A;
 
             _SeqAutoRun = _Aurora.SequenceEntry[SequenceIds.SeqAutoRunCCWH52A];
-            _SeqAutoRun.RunStateChanged += AutoRunSeq_RunStateChanged;
 
             InitVariable();
 
@@ -253,24 +252,5 @@ namespace ILSOS_CCW_H52A.Views
                     return;
             }
         }
-
-        private void AutoRunSeq_RunStateChanged(object sender, (string sequenceId, SequenceRunState state) e)
-        {
-            //AutoRun 상황에서 Recipe Save Lock
-            _RecipeManager.SaveLock(
-                CommonRecipeIds.ScannerObjectTeaching,
-                e.state != SequenceRunState.Idle);
-            //AutoRun 상황에서 Reicpe 화면 수정할 수 없도록 함
-            if (e.state == SequenceRunState.Running) {
-                Application.Current.Dispatcher.InvokeAsync(() => {
-                    _UCRecipe.IsEnabled = false;
-                });
-            } else {
-                Application.Current.Dispatcher.InvokeAsync(() => {
-                    _UCRecipe.IsEnabled = true;
-                });
-            }
-        }
-
     }
 }

WeldingComponents/LASA/GUI/Canvas/CanvasCtrl/Canvas.cs

@@ -1,9 +1,13 @@
+using Aurora.Api;
 using CoreUnit.ScannerCanvasCoreUnit;
 using GUI.Properties;
 using System;
 using System.Collections.Generic;
 using System.Drawing;
+using System.Drawing.Text;
 using System.Linq;
+using System.Security.Cryptography.X509Certificates;
+using System.Text;
 using System.Windows.Forms;
 
 namespace CoreUnit.Control.UserControl.Canvas
@@ -253,6 +257,7 @@ namespace CoreUnit.Control.UserControl.Canvas
     public partial class CanvasCtrl : System.Windows.Forms.UserControl
     {
         public List<Color> scannerParamColorList = new List<Color>();
+        public Logger Log = new Logger("CanvasCtrl");
 
         // ´õºí¹öÆÛ Å×½ºÆ®
         private BufferedGraphicsContext context;
@@ -1305,7 +1310,7 @@ namespace CoreUnit.Control.UserControl.Canvas
             if (m_commandType == eCommandType.select || m_commandType == eCommandType.move) {
                 m_commandType = eCommandType.pan;
             }
-
+            Log.E("Recipe View Command Pan");
             UpdateCursor();
         }
 
@@ -1319,11 +1324,16 @@ namespace CoreUnit.Control.UserControl.Canvas
 
         public void CommandDeleteSelected()
         {
+            StringBuilder sb = new StringBuilder();
             if (m_model.SelectedCount > 0) {
+                foreach(var layer in m_model.SelectedObjects) {
+                    sb.Append($"{layer.No + 1} ");
+                }
                 m_model.DeleteObjects(m_model.SelectedObjects);
                 m_model.ClearSelectedObjects();
                 DoInvalidate(true);
                 UpdateCursor();
+                Log.E($"Layer Delete Success. No. [{sb}]");
             }
         }
 
@@ -1340,6 +1350,7 @@ namespace CoreUnit.Control.UserControl.Canvas
         public void CommandScaleToFit()
         {
             Model.Zoom = ((DataModel)Model).ScaleToFit;
+            Log.E("Recipe View Scale to Fit");
             DoInvalidate(true);
         }
 
@@ -1353,6 +1364,7 @@ namespace CoreUnit.Control.UserControl.Canvas
         {
             SetCenter(new UnitPoint(0, 0));
             DoInvalidate(true);
+            Log.E("Recipe View Focus Center");
         }
 
         public void CommandZoomIn()
@@ -1528,14 +1540,15 @@ namespace CoreUnit.Control.UserControl.Canvas
 
             if ((System.Windows.Forms.Control.ModifierKeys & Keys.Control) == Keys.Control) {
                 if (e.KeyCode >= Keys.D1 && e.KeyCode <= Keys.D9) {
-                    int id = e.KeyCode - Keys.D0;
+                    //int id = e.KeyCode - Keys.D0;
 
-                    foreach (var obj in m_model.ActiveLayer.Objects) {
+                    // CMY - Arc를 선택하려고 하면 OverFlow 뜬다.. 확인 필요
-                        if (obj.ScannerParamID == id)
+                    //foreach (var obj in m_model.ActiveLayer.Objects) {
-                            m_model.AddSelectedObject(obj);
+                    //    if (obj.ScannerParamID == id)
-                    }
+                    //        m_model.AddSelectedObject(obj);
-
+                    //}
-                    DoInvalidate(true);
+                    //Log.I($"Recipe View Parameter All Select. ID : {id}");
+                    //DoInvalidate(true);
                 } else {
                     switch (e.KeyCode) {
                         case Keys.G:
@@ -1545,6 +1558,7 @@ namespace CoreUnit.Control.UserControl.Canvas
 
                         case Keys.S:
                             RunningSnapsModeChange();
+                            Log.E("Recipe View Key Input Save!");
                             break;
 
                         case Keys.Right:
@@ -1552,6 +1566,7 @@ namespace CoreUnit.Control.UserControl.Canvas
                                 float offsetValue = evtGetOffsetValue();
                                 ((DataModel)Model).RotateObjects((float)(-1 * offsetValue), Model.SelectedObjects, true);
                                 DoInvalidate(true);
+                                Log.E("Recipe View Key Input Right Rotate");
                             }
                             break;
 
@@ -1560,56 +1575,69 @@ namespace CoreUnit.Control.UserControl.Canvas
                                 float offsetValue = evtGetOffsetValue();
                                 ((DataModel)Model).RotateObjects((float)offsetValue, Model.SelectedObjects, true);
                                 DoInvalidate(true);
+                                Log.E("Recipe View Key Input Left Rotate");
                             }
                             break;
 
                         case Keys.C:
                             copies = new List<IDrawObject>();
+                            StringBuilder Copy_sb = new StringBuilder();
                             foreach (IDrawObject obj in Model.SelectedObjects) {
                                 copies.Add(obj.Clone());
+                                Copy_sb.Append($"{obj.No + 1} ");
                             }
                             iterationOffsetValue = 0;
                             DoInvalidate(true);
+                            Log.E($"Recipe View Layer Copy. No [{Copy_sb}]");
                             break;
 
                         case Keys.V:
                             if (copies.Count != 0) {
+                                StringBuilder Paste_sb = new StringBuilder();
+
                                 double offsetValue = 3;
                                 ((DataModel)Model).CopyObjects(new UnitPoint(iterationOffsetValue + offsetValue, iterationOffsetValue + offsetValue), copies);
                                 iterationOffsetValue = iterationOffsetValue + offsetValue;
                                 DoInvalidate(true);
+                                foreach (var layer in copies) {
+                                    Paste_sb.Append($"{layer.No + 1} ");
+                                }
+                                Log.E($"Recipe View Layer Paste. No [{Paste_sb}]");
                             }
                             break;
 
                         case Keys.Z: //Undo
                             CommandDoUndo();
+                            Log.E("Recipe View Do Undo");
                             break;
 
                         case Keys.Y: //Redo
                             CommandDoRedo();
+                            Log.E("Recipe View Do Redo");
                             break;
 
-                        //키보드로 객체 이동
+                        ////키보드로 객체 이동
-                        case Keys.Up://선택된 객체를 지정된 위치값 만큼 상승
+                        //case Keys.Up://선택된 객체를 지정된 위치값 만큼 상승
-                            if (evtGetOffsetValue != null) {
+                        //    if (evtGetOffsetValue != null) {
-                                float offsetValue = evtGetOffsetValue();
+                        //        float offsetValue = evtGetOffsetValue();
-                                Model.MoveObjects(new UnitPoint(0, offsetValue), Model.SelectedObjects, true);
+                        //        Model.MoveObjects(new UnitPoint(0, offsetValue), Model.SelectedObjects, true);
-                                DoInvalidate(true);
+                        //        DoInvalidate(true);
-                            }
+                        //    }
-                            break;
+                        //    break;
 
-                        case Keys.Down://선택된 객체를 지정된 위치값 만큼 하강
+                        //case Keys.Down://선택된 객체를 지정된 위치값 만큼 하강
-                            if (evtGetOffsetValue != null) {
+                        //    if (evtGetOffsetValue != null) {
-                                float offsetValue = evtGetOffsetValue();
+                        //        float offsetValue = evtGetOffsetValue();
-                                Model.MoveObjects(new UnitPoint(0, -1 * offsetValue), Model.SelectedObjects, true);
+                        //        Model.MoveObjects(new UnitPoint(0, -1 * offsetValue), Model.SelectedObjects, true);
-                                DoInvalidate(true);
+                        //        DoInvalidate(true);
-                            }
+                        //    }
-                            break;
+                        //    break;
 
                         case Keys.A:
                             foreach (var obj in m_model.ActiveLayer.Objects) {
                                 m_model.AddSelectedObject(obj);
                             }
+                            Log.E("Recipe View All Layer Select");
                             break;
 
                     }
@@ -1660,6 +1688,7 @@ namespace CoreUnit.Control.UserControl.Canvas
                     if (evtGetOffsetValue != null) {
                         float offsetValue = evtGetOffsetValue();
                         Model.MoveObjects(new UnitPoint(0, offsetValue), Model.SelectedObjects, true);
+                        Log.E($"Input Key Up, Layer Move. [X : 0, |  Y : {offsetValue}]");
                         DoInvalidate(true);
                     }
                     break;
@@ -1668,6 +1697,7 @@ namespace CoreUnit.Control.UserControl.Canvas
                     if (evtGetOffsetValue != null) {
                         float offsetValue = evtGetOffsetValue();
                         Model.MoveObjects(new UnitPoint(0, -1 * offsetValue), Model.SelectedObjects, true);
+                        Log.E($"Input Key Down, Layer Move. [X : 0, |  Y : {-1 * offsetValue}]");
                         DoInvalidate(true);
                     }
                     break;
@@ -1676,6 +1706,7 @@ namespace CoreUnit.Control.UserControl.Canvas
                     if (evtGetOffsetValue != null) {
                         float offsetValue = evtGetOffsetValue();
                         Model.MoveObjects(new UnitPoint(offsetValue, 0), Model.SelectedObjects, true);
+                        Log.E($"Input Key Right, Layer Move. [X : {offsetValue} |  Y : 0]");
                         DoInvalidate(true);
                     }
                     break;
@@ -1684,6 +1715,7 @@ namespace CoreUnit.Control.UserControl.Canvas
                     if (evtGetOffsetValue != null) {
                         double offsetValue = evtGetOffsetValue();
                         Model.MoveObjects(new UnitPoint(-1 * offsetValue, 0), Model.SelectedObjects, true);
+                        Log.E($"Input Key Left, Layer Move. [X : {-1 * offsetValue} |  Y : 0]");
                         DoInvalidate(true);
                     }
                     break;
@@ -1692,6 +1724,7 @@ namespace CoreUnit.Control.UserControl.Canvas
                     if (evtGetAngleOffsetValue != null) {
                         float angleOffset = evtGetAngleOffsetValue();
                         ((DataModel)Model).RotateObjects(-1 * (float)angleOffset, Model.SelectedObjects, true);
+                        Log.E($"Input Key E, Angle Rotate");
                         DoInvalidate(true);
                     }
                     break;
@@ -1700,6 +1733,7 @@ namespace CoreUnit.Control.UserControl.Canvas
                     if (evtGetAngleOffsetValue != null) {
                         float angleOffset = evtGetAngleOffsetValue();
                         ((DataModel)Model).RotateObjects((float)angleOffset, Model.SelectedObjects, true);
+                        Log.E($"Input Key Q, Angle Rotate");
                         DoInvalidate(true);
                     }
                     break;

WeldingComponents/LASA/GUI/Dialog/WeldingParamDlg.cs

@@ -86,16 +86,16 @@ namespace CoreUnit.Scanner.UserControl.Canvas.Dialog
                 btnOk.Enabled = false;
                 btnCancel.Enabled = true;
             }
-            if(_MachineName == eMachineName.H52A_CCW || _MachineName == eMachineName.H52A_ACW || _MachineName == eMachineName.CIT) {
+            //if(_MachineName == eMachineName.H52A_CCW || _MachineName == eMachineName.H52A_ACW || _MachineName == eMachineName.CIT) {
-                label58.Text = "(0~4000)";
+            label58.Text = _MachineName == eMachineName.H52A_CCW ? "(0~1500)" : "(0~4000)";
-                label31.Text = "(0~4000)";
+            label31.Text = _MachineName == eMachineName.H52A_CCW ? "(0~2500)" : "(0~4000)";
             label32.Text = "(0~10000)";
             label17.Text = "(1~8000)";
 
-                label22.Enabled = false;
+            label22.Enabled = _MachineName == eMachineName.H52A_CCW;
-                tbLaserPower2.Enabled = false;
+            tbLaserPower2.Enabled = _MachineName == eMachineName.H52A_CCW;
-                label29.Enabled = false;
+            label29.Enabled = _MachineName == eMachineName.H52A_CCW;
-                label31.Enabled = false;
+            label31.Enabled = _MachineName == eMachineName.H52A_CCW;
 
             // Ramping Start, End 구분 후 사용한다.       Power 2번은 여전히 막아둠
             //label68.Enabled = false;
@@ -182,7 +182,7 @@ namespace CoreUnit.Scanner.UserControl.Canvas.Dialog
             nudRampingEndPower2.Visible = false;
 
             #endregion
-            }
+            //}
 
             //Welding Paramter 색 지정
             //rbParam1.ForeColor = Color.FromName(((WeldingParameterIDEditor.eWeldingColor)1).ToString());

WeldingComponents/WeldingCommon/Views/Recipes/UCScannerObjectTeachingViewModel.cs

@@ -181,6 +181,7 @@ namespace WeldingCommon.Views
 
         public void OnChanged((int id, string name) recipe)
         {
+            Log.I($"Recipe Select. ID : {recipe.id}, Name : {recipe.name}");
             if (WeldingRecipeManager.SelectedRecipe.id == recipe.id && WeldingRecipeManager.SelectedRecipe.name == recipe.name) {
                 return;
             }